P0077 Hyundai Code - Intake Valve Control Solenoid Circuit High Bank 1
Quick Answer
The intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Bank 1 harness is open or shorted, Intake Valve Control Solenoid Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0077 Hyundai indicates Intake Valve Control Solenoid Circuit High Bank 1.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Bank 1 harness is open or shorted, Intake Valve Control Solenoid Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0077 Hyundai Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through the intake valve timing control unit or stops the oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0077 Hyundai?
- Faulty Intake Valve Control Solenoid Bank 1
- Intake Valve Control Solenoid Bank 1 harness is open or shorted
- Intake Valve Control Solenoid Bank 1 circuit poor electrical connection
How to Fix the DTC P0077 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0077 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0077 Hyundai code?
Need more information on how to fix the P0077 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0077 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0077 Hyundai Code
1. What does the OBDII code P0077 mean on a Hyundai?
P0077 indicates an issue with the Intake Valve Control Solenoid Circuit High on Bank 1, meaning the circuit voltage is higher than expected.
2. What are the common symptoms of code P0077 in a Hyundai?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, engine stalling, and the Check Engine Light turning on.
3. What causes the P0077 code on a Hyundai?
Possible causes include a faulty intake valve control solenoid, damaged wiring or connectors in the solenoid circuit, or issues with the engine control module (ECM).
4. How can I fix the P0077 code on my Hyundai?
Start by inspecting the intake valve control solenoid and its wiring for damage. Replace the solenoid if faulty, and repair or replace any damaged wiring or connectors.
5. Can I drive my Hyundai with the P0077 code?
Driving with this code is not recommended, as it can lead to poor engine performance and potential long-term damage if not addressed.
6. How is the P0077 code diagnosed on a Hyundai?
A mechanic will use a scan tool to confirm the code, perform a visual inspection of the solenoid and wiring, and test the solenoid's resistance and voltage to identify the issue.
7. How much does it cost to fix the P0077 code on a Hyundai?
Repair costs can vary, but replacing the intake valve control solenoid typically costs between $100 and $300, including parts and labor.
8. Can a dirty intake valve cause the P0077 code?
No, the code specifically relates to the solenoid circuit's electrical issue, not the physical condition of the intake valve itself.
9. What is the function of the intake valve control solenoid on a Hyundai?
The solenoid helps regulate the timing of the intake valves to optimize engine performance and fuel efficiency.
10. Will clearing the P0077 code fix the problem?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P0077 Hyundai OBDII Code
Code P0077 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
