AutoCodes – Nissan – P0075 2011 Nissan Rogue

P0075 2011 Nissan Rogue Code - Intake Valve Control Solenoid Circuit Bank 1

Quick Answer

Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0075 2011 Nissan Rogue indicates Intake Valve Control Solenoid Circuit Bank 1.
Common causes
Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 7,175
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0075 2011 Nissan Rogue Description

Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM).
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
OBDII Code P0075 2011 Nissan Rogue - Intake Valve Control Solenoid Circuit Bank 1 - AutoCodes.com
P0075 2011 Nissan Rogue Code - Intake Valve Control Solenoid Circuit Bank 1

What are the Possible Causes of the DTC P0075 2011 Nissan Rogue?

  • Faulty Intake Valve Control Solenoid Bank 1
  • Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
  • Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection

How to Fix the DTC P0075 2011 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0075 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0075 2011 Nissan Rogue code?

Need more information on how to fix the P0075 2011 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0075 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0075 2011 Nissan Rogue Code

1. What does OBDII code P0075 for a 2011 Nissan Rogue mean?

The OBDII code P0075 indicates a problem with the Intake Valve Control Solenoid Circuit for Bank 1 in your 2011 Nissan Rogue.

2. What are the common symptoms of OBDII code P0075 in a 2011 Nissan Rogue?

Common symptoms of code P0075 in a 2011 Nissan Rogue may include rough idling, decreased fuel efficiency, stalling, and a check engine light illuminated on the dashboard.

3. What are the possible causes of OBDII code P0075 in a 2011 Nissan Rogue?

Potential causes of OBDII code P0075 in a 2011 Nissan Rogue include a faulty intake valve control solenoid, wiring issues in the circuit, a malfunctioning ECM, or a poor electrical connection.

4. How can I diagnose the issue related to OBDII code P0075 in my 2011 Nissan Rogue?

To diagnose the problem associated with code P0075 in a 2011 Nissan Rogue, you can use an OBDII scanner to retrieve the specific fault code, inspect the intake valve control solenoid and its wiring for any visible damage, and perform a thorough visual inspection of related components.

5. Can I continue driving my 2011 Nissan Rogue with OBDII code P0075?

It is not recommended to drive your 2011 Nissan Rogue with OBDII code P0075, as the issue can lead to further damage to the engine or emissions system. It is best to address the problem promptly.

6. How can I repair OBDII code P0075 in my 2011 Nissan Rogue?

Repairing OBDII code P0075 in a 2011 Nissan Rogue typically involves replacing the faulty intake valve control solenoid, repairing any damaged wiring, ensuring proper electrical connections, or reprogramming the ECM if necessary.

7. Are there any DIY tips for fixing OBDII code P0075 in a 2011 Nissan Rogue?

While some simple checks like inspecting the wiring and connections can be done by DIY enthusiasts, diagnosing and repairing OBDII code P0075 in a 2011 Nissan Rogue may require professional expertise due to the complexity of the engine control system.

8. How much does it cost to fix OBDII code P0075 in a 2011 Nissan Rogue?

The cost of fixing OBDII code P0075 in a 2011 Nissan Rogue can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to repair it yourself or take it to a mechanic. Costs may range from a few hundred to over a thousand dollars.

9. Will resetting the check engine light resolve OBDII code P0075 in a 2011 Nissan Rogue?

Resetting the check engine light may temporarily turn it off, but it will not fix the underlying problem causing OBDII code P0075 in a 2011 Nissan Rogue. It is crucial to diagnose and address the root cause of the issue to prevent further complications.

10. How long does it take to repair OBDII code P0075 in a 2011 Nissan Rogue?

The repair time for OBDII code P0075 in a 2011 Nissan Rogue can vary based on the specific cause of the issue, the availability of parts, and the expertise of the mechanic. In general, it may take a few hours to a full day to diagnose and repair the problem.

Discuss the causes and fixes for P0075 2011 Nissan Rogue OBDII Code

  • How do I change the intake valve control solenoid in my 2020Nissan Rogue it has a code of P0075

  • Just remove the 10 mm bolt, pull out the solenoid and install the new one in reverse order.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play