P0075 2011 Nissan Altima Sedan Code - Intake Valve Control Solenoid Circuit Bank 1
Quick Answer
Intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0075 2011 Nissan Altima Sedan indicates Intake Valve Control Solenoid Circuit Bank 1.
- Common causes
- Common causes include Faulty Intake Valve Control Solenoid Bank 1, Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted, Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0075 2011 Nissan Altima Sedan Description
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0075 2011 Nissan Altima Sedan?
- Faulty Intake Valve Control Solenoid Bank 1
- Intake Valve Control Solenoid Circuit Bank 1 harness is open or shorted
- Intake Valve Control Solenoid Circuit Bank 1 circuit poor electrical connection
How to Fix the DTC P0075 2011 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0075 2011 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0075 2011 Nissan Altima Sedan code?
Need more information on how to fix the P0075 2011 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0075 2011 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0075 2011 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0075 on a 2011 Nissan Altima Sedan?
- Common symptoms include rough idling, decreased fuel efficiency, and potentially rough engine performance.
2. What does the OBDII code P0075 indicate on a 2011 Nissan Altima Sedan?
- The code indicates an issue with the Intake Valve Control Solenoid Circuit Bank 1 in the vehicle's engine.
3. What are the possible causes of OBDII code P0075 on a 2011 Nissan Altima Sedan?
- Potential causes include a faulty intake valve control solenoid, wiring issues, or a malfunctioning engine control module.
4. How can I diagnose the Intake Valve Control Solenoid Circuit Bank 1 issue triggering code P0075 on my 2011 Nissan Altima Sedan?
- You can use an OBDII scanner to read the code, visually inspect the wiring and connections, and test the intake valve control solenoid for proper function.
5. Can I drive my 2011 Nissan Altima Sedan with OBDII code P0075?
- It is not recommended to drive the vehicle with this code present, as it can lead to further engine issues and potential damage.
6. How can I repair OBDII code P0075 on my 2011 Nissan Altima Sedan?
- The repair typically involves replacing the faulty intake valve control solenoid, addressing any wiring issues, and resetting the trouble code.
7. Is it safe to reset the OBDII code P0075 on my 2011 Nissan Altima Sedan without repairing the issue?
- It is not advisable to simply reset the code without addressing the underlying problem, as it may lead to ongoing engine issues and potential safety risks.
8. How much does it cost to fix OBDII code P0075 on a 2011 Nissan Altima Sedan?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $100 to $300 or more.
9. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0075 on a 2011 Nissan Altima Sedan?
- Depending on the exact cause, a DIY enthusiast may be able to address the issue by replacing the intake valve control solenoid and performing basic wiring checks.
10. How often does OBDII code P0075 occur in 2011 Nissan Altima Sedans?
- While not extremely common, occurrences of code P0075 related to the Intake Valve Control Solenoid Circuit Bank 1 have been reported in some 2011 Nissan Altima Sedans.
Discuss the causes and fixes for P0075 2011 Nissan Altima Sedan OBDII Code
Code P0075 2011 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
