AutoCodes – Acura – P0068 Acura

P0068 Acura Code - Manifold Absolute Pressure/Mass Air Flow Sensor - Throttle Position Correlation

Quick Answer

The Powertrain Control Module (PCM) monitors a vehicle operation rationality check by comparing Throttle Position (TP) to Mass Air Flow (MAF) readings. Common causes include Faulty Mass Air Flow (MAF) sensor, Large vacuum leak, Leaking air duct system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0068 Acura indicates Manifold Absolute Pressure/Mass Air Flow Sensor - Throttle Position Correlation.
Common causes: Common causes include Faulty Mass Air Flow (MAF) sensor, Large vacuum leak, Leaking air duct system.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,913

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0068 Acura Description

The Powertrain Control Module (PCM) monitors a vehicle operation rationality check by comparing Throttle Position (TP) to Mass Air Flow (MAF) readings. If, during a self-test, the comparison of the TP sensor and MAF sensor readings are not consistent with the calibrated load values, the test fails and a diagnostic trouble code is stored in continuous memory.

OBDII Code P0068 Acura - Manifold Absolute Pressure/Mass Air Flow Sensor - Throttle Position Correlation - AutoCodes.com — P0068 Acura Code - Manifold Absolute Pressure/Mass Air Flow Sensor - Throttle Position Correlation

What does this mean?

What are the Possible Causes of the DTC P0068 Acura?

Faulty Mass Air Flow (MAF) sensor
Large vacuum leak
Leaking air duct system
Mass Air Flow (MAF) poor electrical connection
Manifold Absolute Pressure (MAP) poor electrical connection
Faulty Manifold Absolute Pressure (MAP) sensor
TP sensor not seated properly
Faulty Throttle Position (TP) sensor

How to Fix the DTC P0068 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0068 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0068 Acura code?

Need more information on how to fix the P0068 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0068 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0068 Acura Code

1. What are common symptoms of OBDII code P0068 in an Acura?

- Common symptoms include poor engine performance, rough idling, stalling, decreased fuel efficiency, and illuminated Check Engine light.

2. What does OBDII code P0068 in an Acura indicate?

- OBDII code P0068 indicates a correlation problem between the manifold absolute pressure (MAP) sensor, mass airflow (MAF) sensor, and throttle position sensor.

3. What are possible causes of OBDII code P0068 in an Acura?

- Possible causes include a faulty MAP sensor, MAF sensor, throttle position sensor, wiring issues, vacuum leaks, or a problem with the intake system.

4. How can I diagnose the cause of OBDII code P0068 in my Acura?

- Diagnose the cause by checking the sensor readings using a scan tool, inspecting sensor wiring and connections, testing sensor functionality, and checking for vacuum leaks.

5. Can I drive my Acura with OBDII code P0068?

- It is not recommended to drive your Acura with OBDII code P0068 as it can lead to further damage and poor engine performance.

6. How can I repair OBDII code P0068 in my Acura?

- Repair involves identifying and fixing the underlying issue, which may include replacing faulty sensors, repairing wiring, fixing vacuum leaks, or cleaning the throttle body.

7. Is it safe to ignore OBDII code P0068 in my Acura?

- Ignoring OBDII code P0068 can lead to decreased engine performance, potential stalling, and increased fuel consumption, so it is not advised to ignore the issue.

8. How much does it cost to fix OBDII code P0068 in an Acura?

- The cost to fix OBDII code P0068 varies depending on the underlying issue, but it may range from $100 to $500 or more, including parts and labor.

9. Can I reset OBDII code P0068 in my Acura using a scan tool?

- Yes, you can clear the code using a scan tool, but it is recommended to diagnose and fix the underlying issue before resetting the code.

10. How can I prevent OBDII code P0068 from recurring in my Acura?

- To prevent code P0068 from recurring, ensure regular maintenance of sensors, check for vacuum leaks, keep the intake system clean, and address any issues promptly.