AutoCodesBuick – P0058 Buick

P0058 Buick Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0058 Buick indicates HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 370
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 23, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0058 Buick Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to voltage in the heater output low side driver circuit of the heated oxygen sensor when the heater is commanded ON for greater than 5 s.
OBDII Code P0058 Buick - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2 - AutoCodes.com
P0058 Buick Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 2

What are the Possible Causes of the DTC P0058 Buick?

  • Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
  • Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
  • Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
  • Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0058 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0058 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0058 Buick code?

Need more information on how to fix the P0058 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0058 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0058 Buick Code

What does OBDII code P0058 mean on a Buick?

P0058 indicates a high voltage issue in the heater control circuit for the oxygen sensor (HO2S) located on Bank 2, Sensor 2.

What are the symptoms of code P0058 in a Buick?

Common symptoms include an illuminated Check Engine Light, possible engine performance issues, and failed emissions tests.

What causes code P0058 in a Buick?

Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the heater circuit, a failed PCM, or a short to power in the circuit.

How do I diagnose code P0058 on my Buick?

Start by inspecting the wiring and connectors for damage or corrosion. Then, test the oxygen sensor heater circuit for proper resistance and check for voltage issues.

Can I drive my Buick with a P0058 code?

While the vehicle may still be drivable, it’s not recommended to ignore the code, as it can affect fuel efficiency and emissions.

How much does it cost to fix a P0058 code on a Buick?

Repair costs vary depending on the cause but typically range from $150 to $400, including parts and labor for replacing the oxygen sensor or repairing wiring.

How do I fix code P0058 on a Buick?

Repairs may involve replacing the oxygen sensor, repairing damaged wiring or connectors, or addressing a PCM issue if necessary.

Is code P0058 specific to certain Buick models?

No, P0058 can appear on any Buick model equipped with OBDII diagnostics and a heated oxygen sensor.

Can a bad oxygen sensor cause code P0058 on a Buick?

Yes, a faulty oxygen sensor is one of the most common causes of this code.

Will clearing the code P0058 fix the issue on my Buick?

Clearing the code may turn off the Check Engine Light temporarily, but unless the underlying issue is resolved, the code will likely return.

Discuss the causes and fixes for P0058 Buick OBDII Code

Code P0058 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play