AutoCodes – Nissan – P0058 2010 Nissan Sentra

P0058 2010 Nissan Sentra Code - HO2S22 Heater Control Circuit High

Quick Answer

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0058 2010 Nissan Sentra indicates HO2S22 Heater Control Circuit High.
Common causes
Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,223
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0058 2010 Nissan Sentra Description

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
OBDII Code P0058 2010 Nissan Sentra - HO2S22 Heater Control Circuit High - AutoCodes.com
P0058 2010 Nissan Sentra Code - HO2S22 Heater Control Circuit High

What are the Possible Causes of the DTC P0058 2010 Nissan Sentra?

  • Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit fuse
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0058 2010 Nissan Sentra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0058 2010 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0058 2010 Nissan Sentra code?

Need more information on how to fix the P0058 2010 Nissan Sentra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0058 2010 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0058 2010 Nissan Sentra Code

1. What are the common symptoms of OBDII code P0058 on a 2010 Nissan Sentra?

The common symptoms of OBDII code P0058 (HO2S22 Heater Control Circuit High) on a 2010 Nissan Sentra may include poor fuel economy, rough idling, hesitation during acceleration, and an illuminated check engine light.

2. What does the OBDII code P0058 mean on a 2010 Nissan Sentra?

OBDII code P0058 indicates an issue with the HO2S22 (Heated Oxygen Sensor Bank 2 Sensor 2) heater control circuit being detected as too high by the vehicle's onboard diagnostic system.

3. What are the possible causes of OBDII code P0058 on a 2010 Nissan Sentra?

Possible causes of OBDII code P0058 on a 2010 Nissan Sentra include a faulty HO2S22 sensor, damaged wiring or connectors in the heater circuit, a blown fuse, or issues with the engine control module (ECM).

4. How can I diagnose OBDII code P0058 on a 2010 Nissan Sentra?

Diagnosing OBDII code P0058 on a 2010 Nissan Sentra involves using an OBDII scanner to retrieve the code, checking the wiring and connectors related to the HO2S22 sensor, testing the sensor's resistance, and inspecting the fuse for the heater circuit.

5. Can I continue driving my 2010 Nissan Sentra with OBDII code P0058?

It is not recommended to continue driving your 2010 Nissan Sentra with OBDII code P0058, as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time. It is best to address the issue promptly.

6. How can I repair OBDII code P0058 on a 2010 Nissan Sentra?

To repair OBDII code P0058 on a 2010 Nissan Sentra, you may need to replace the HO2S22 sensor, repair any damaged wiring or connectors, check and replace the fuse if necessary, and clear the error code with an OBDII scanner.

7. Is it possible to reset OBDII code P0058 on a 2010 Nissan Sentra without fixing the issue?

While you can clear the error code using an OBDII scanner, it is not recommended to reset OBDII code P0058 on a 2010 Nissan Sentra without addressing the underlying issue, as it will likely return and potentially cause further problems.

8. How much does it cost to fix OBDII code P0058 on a 2010 Nissan Sentra?

The cost to fix OBDII code P0058 on a 2010 Nissan Sentra can vary depending on the root cause of the issue, the cost of parts, and labor rates. It is recommended to consult a mechanic for an accurate estimate.

9. Can a DIY enthusiast repair OBDII code P0058 on a 2010 Nissan Sentra?

If you have experience with automotive repairs and access to the necessary tools, you may be able to repair OBDII code P0058 on a 2010 Nissan Sentra yourself. However, it is important to ensure you have the proper knowledge and skills to do so safely and effectively.

10. How can I prevent OBDII code P0058 from occurring on my 2010 Nissan Sentra in the future?

To prevent OBDII code P0058 from occurring on your 2010 Nissan Sentra in the future, make sure to perform regular maintenance on your vehicle, address any engine-related issues promptly, and avoid driving with a misfiring engine or running your vehicle on low fuel levels.

Discuss the causes and fixes for P0058 2010 Nissan Sentra OBDII Code

Code P0058 2010 Nissan Sentra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play