P0058 2006 Nissan Altima Sedan Code - HO2S22 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0058 2006 Nissan Altima Sedan indicates HO2S22 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0058 2006 Nissan Altima Sedan Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0058 2006 Nissan Altima Sedan?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0058 2006 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0058 2006 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0058 2006 Nissan Altima Sedan code?
Need more information on how to fix the P0058 2006 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0058 2006 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0058 2006 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0058 in a 2006 Nissan Altima Sedan?
The common symptoms of code P0058 in a 2006 Nissan Altima Sedan include poor engine performance, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P0058 indicate for a 2006 Nissan Altima Sedan?
Code P0058 indicates an issue with the Heater Control Circuit of the HO2S22 sensor in a 2006 Nissan Altima Sedan.
3. What are the possible causes of OBDII code P0058 in a 2006 Nissan Altima Sedan?
Possible causes of code P0058 in a 2006 Nissan Altima Sedan include a faulty HO2S22 sensor, damaged wiring or connectors, a blown fuse, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P0058 in my 2006 Nissan Altima Sedan?
Diagnosing code P0058 involves inspecting the HO2S22 sensor, checking the wiring and connectors for damage, testing the fuse, and using a scan tool to analyze data from the sensor.
5. Can I still drive my 2006 Nissan Altima Sedan with OBDII code P0058?
It is not recommended to drive your 2006 Nissan Altima Sedan with code P0058 as it can lead to further damage to the engine and affect overall performance.
6. How can I repair OBDII code P0058 in my 2006 Nissan Altima Sedan?
Repairing code P0058 may involve replacing the HO2S22 sensor, repairing or replacing damaged wiring and connectors, checking and replacing the fuse if necessary, and resetting the ECM.
7. Will resetting the Check Engine Light resolve OBDII code P0058 in my 2006 Nissan Altima Sedan?
Simply resetting the Check Engine Light will not resolve code P0058. The underlying issue causing the code needs to be diagnosed and repaired to prevent it from reoccurring.
8. How much does it typically cost to fix OBDII code P0058 in a 2006 Nissan Altima Sedan?
The cost of fixing code P0058 in a 2006 Nissan Altima Sedan can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast repair OBDII code P0058 in a 2006 Nissan Altima Sedan?
While some DIY enthusiasts may be able to diagnose and repair code P0058 themselves, it is recommended to have a professional mechanic perform the repairs to ensure proper diagnosis and fix.
10. How often does OBDII code P0058 occur in a 2006 Nissan Altima Sedan?
Code P0058 in a 2006 Nissan Altima Sedan is relatively uncommon, but it can occur due to sensor or circuit issues and should be addressed promptly to avoid further complications.
Discuss the causes and fixes for P0058 2006 Nissan Altima Sedan OBDII Code
Code P0058 2006 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
