P0058 2003 Nissan Altima Sedan Code - HO2S22 Heater Control Circuit High
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0058 2003 Nissan Altima Sedan indicates HO2S22 Heater Control Circuit High.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0058 2003 Nissan Altima Sedan Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0058 2003 Nissan Altima Sedan?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 harness is open shorted
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0058 2003 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0058 2003 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0058 2003 Nissan Altima Sedan code?
Need more information on how to fix the P0058 2003 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0058 2003 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0058 2003 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0058 on a 2003 Nissan Altima Sedan?
- Common symptoms include decreased fuel efficiency, rough idling, and the illumination of the check engine light.
2. What does the OBDII code P0058 on a 2003 Nissan Altima Sedan indicate?
- The code P0058 indicates a malfunction in the HO2S22 (Heated Oxygen Sensor 2 Bank 2) heater control circuit, specifically a high voltage condition.
3. What are the possible causes of OBDII code P0058 on a 2003 Nissan Altima Sedan?
- Possible causes include a faulty HO2S22 sensor, damaged wiring or connectors in the heater circuit, a blown fuse, or an issue with the engine control module (ECM).
4. How can I diagnose the OBDII code P0058 on my 2003 Nissan Altima Sedan?
- Diagnose the code by using an OBDII scanner to retrieve and interpret the code, then inspect the HO2S22 sensor, wiring, connectors, and related components for any visible damage or issues.
5. Can I continue driving my 2003 Nissan Altima Sedan with the OBDII code P0058 illuminated?
- It is not recommended to drive with the code illuminated, as it can lead to decreased fuel efficiency and potentially cause further damage to the vehicle's emissions system.
6. How can I repair OBDII code P0058 on my 2003 Nissan Altima Sedan?
- Repair options include replacing the faulty HO2S22 sensor, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, and resetting the ECM.
7. Are there any DIY tips for resolving OBDII code P0058 on a 2003 Nissan Altima Sedan?
- DIY tips include checking the sensor and wiring for visible damage, ensuring proper connections, and consulting the vehicle's service manual for specific repair procedures.
8. How much does it typically cost to fix OBDII code P0058 on a 2003 Nissan Altima Sedan?
- The cost of fixing the code can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor if you take it to a professional mechanic.
9. Is it necessary to clear the OBDII code P0058 after repairing the issue on a 2003 Nissan Altima Sedan?
- Yes, it is recommended to clear the code using an OBDII scanner after repairing the issue to reset the check engine light and ensure that the repair was successful.
10. How can I prevent OBDII code P0058 from reoccurring on my 2003 Nissan Altima Sedan?
- To prevent the code from reoccurring, ensure regular maintenance of the vehicle, use high-quality sensors and components, and address any issues promptly to avoid further damage.
Discuss the causes and fixes for P0058 2003 Nissan Altima Sedan OBDII Code
Code P0058 2003 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
