AutoCodes – GMC – P0052 2014 GMC Sierra

P0052 2014 GMC Sierra Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor Bank 2 Sensor 1 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0052 2014 GMC Sierra indicates HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor Bank 2 Sensor 1 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 217

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0052 2014 GMC Sierra Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to voltage in the heater output low side driver circuit of the heated oxygen sensor when the heater is commanded ON for greater than 5 s.

OBDII Code P0052 2014 GMC Sierra - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1 - AutoCodes.com — P0052 2014 GMC Sierra Code - HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0052 2014 GMC Sierra?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1
Heated Oxygen Sensor Bank 2 Sensor 1 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 1 fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0052 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0052 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0052 2014 GMC Sierra code?

Need more information on how to fix the P0052 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0052 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0052 2014 GMC Sierra Code

1. What are the common symptoms of OBDII code P0052 in a 2014 GMC Sierra?

- Common symptoms include poor fuel economy, rough idle, engine misfires, and the illumination of the Check Engine Light.

2. What does the HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1 error code mean for my 2014 GMC Sierra?

- This code indicates that there is a high voltage condition in the heater control circuit of the oxygen sensor located on bank 2 sensor 1 in your GMC Sierra.

3. What are the possible causes of OBDII code P0052 in a 2014 GMC Sierra?

- The possible causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or an issue with the engine control module.

4. How serious is the HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1 error in a 2014 GMC Sierra?

- While the vehicle may still be operable with this code, it can lead to decreased fuel efficiency and increased emissions. It's important to diagnose and repair the issue promptly.

5. Can I continue driving my 2014 GMC Sierra with the P0052 code present?

- It is generally not recommended to continue driving with this code active, as it can lead to further damage to the engine and emissions system. It's best to address the issue as soon as possible.

6. How can I diagnose and repair OBDII code P0052 in my 2014 GMC Sierra?

- Diagnosis typically involves checking the oxygen sensor's wiring and connectors, testing the sensor itself, and inspecting related components. Repair may involve replacing the oxygen sensor, repairing wiring, or addressing any other underlying issues.

7. Is it possible to reset the Check Engine Light triggered by code P0052 in a 2014 GMC Sierra?

- Yes, you can reset the Check Engine Light using an OBDII scanner or by disconnecting the car's battery for a few minutes. However, the light will likely reappear if the underlying issue causing the code is not resolved.

8. How much does it cost to fix the HO2S Heater Control Circuit High Voltage Bank 2 Sensor 1 error in a 2014 GMC Sierra?

- The cost of repairs can vary depending on the exact cause of the issue and whether you choose to fix it yourself or take it to a mechanic. Costs may range from a few hundred to over a thousand dollars.

9. What steps can I take to prevent OBDII code P0052 from recurring in my 2014 GMC Sierra?

- To prevent this code from recurring, it's important to perform regular maintenance on your vehicle, including checking and replacing oxygen sensors as needed, inspecting wiring harnesses, and ensuring proper engine performance.

10. Will fixing the P0052 error code improve the performance of my 2014 GMC Sierra?

- Yes, resolving the issue indicated by this code can lead to improved fuel efficiency, smoother engine operation, and reduced emissions, ultimately enhancing the overall performance of your GMC Sierra.