P0051 Chrysler Code - O2 Sensor 2/1 Heater Circuit Low
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0051 Chrysler indicates O2 Sensor 2/1 Heater Circuit Low.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0051 Chrysler Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0051 Chrysler?
- Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection
- Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 fuse
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0051 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0051 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0051 Chrysler code?
Need more information on how to fix the P0051 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0051 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0051 Chrysler Code
What does the OBDII code P0051 mean on a Chrysler?
P0051 indicates a low voltage issue in the heater circuit of the oxygen sensor located in Bank 2, Sensor 1.
What are the common symptoms of code P0051 in a Chrysler?
Symptoms may include the check engine light turning on, poor fuel economy, rough idling, or failed emissions tests.
What causes the P0051 code to appear in a Chrysler?
Common causes include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or a malfunctioning Engine Control Module (ECM).
Can I drive my Chrysler with the P0051 code?
While your vehicle may still drive, it’s not recommended to ignore this code as it can lead to increased emissions, reduced fuel efficiency, and potential engine damage over time.
How do I diagnose the P0051 code on a Chrysler?
Start by inspecting the oxygen sensor wiring and connectors for damage, check the fuse for the heater circuit, and test the sensor and circuit with a multimeter.
How do I fix the P0051 code in a Chrysler?
Repairs may involve replacing the oxygen sensor, repairing damaged wiring, replacing a blown fuse, or, in rare cases, addressing issues with the ECM.
How much does it cost to repair the P0051 code on a Chrysler?
Replacing an oxygen sensor typically costs $100 to $300, including parts and labor, but costs may vary depending on the exact issue.
Can a bad oxygen sensor cause the P0051 code?
Yes, a faulty oxygen sensor is one of the most common reasons for the P0051 code to appear.
Will clearing the code fix the P0051 issue in my Chrysler?
Clearing the code may turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will likely return.
Is the P0051 code related to emissions testing?
Yes, a vehicle with the P0051 code will likely fail an emissions test due to improper oxygen sensor function.
Discuss the causes and fixes for P0051 Chrysler OBDII Code
Code P0051 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
