AutoCodes – Nissan – P0037 2006 Nissan Altima Sedan

P0037 2006 Nissan Altima Sedan Code - HO2S12 Heater Control Circuit Low

Quick Answer

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0037 2006 Nissan Altima Sedan indicates HO2S12 Heater Control Circuit Low.
Common causes
Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,090
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0037 2006 Nissan Altima Sedan Description

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
OBDII Code P0037 2006 Nissan Altima Sedan - HO2S12 Heater Control Circuit Low - AutoCodes.com
P0037 2006 Nissan Altima Sedan Code - HO2S12 Heater Control Circuit Low

What are the Possible Causes of the DTC P0037 2006 Nissan Altima Sedan?

  • Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
  • Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 fuse
  • Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 harness is open or shorted
  • Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0037 2006 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0037 2006 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0037 2006 Nissan Altima Sedan code?

Need more information on how to fix the P0037 2006 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0037 2006 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0037 2006 Nissan Altima Sedan Code

1. What does the OBDII code P0037 for a 2006 Nissan Altima Sedan mean?

The code P0037 indicates a malfunction in the HO2S12 (Heated Oxygen Sensor Bank 1 Sensor 2) heater control circuit in the vehicle.

2. What are the common symptoms of OBDII code P0037 in a 2006 Nissan Altima Sedan?

Common symptoms of code P0037 include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light on the dashboard.

3. What are the possible causes of the HO2S12 heater control circuit low error in a 2006 Nissan Altima Sedan?

Possible causes of the P0037 code include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or a problem with the PCM (Powertrain Control Module).

4. How can I diagnose the P0037 code on my 2006 Nissan Altima Sedan?

To diagnose the P0037 code, you can use an OBDII scanner to retrieve the specific fault code. Check the wiring and connectors for any visible damage, test the oxygen sensor, and inspect the fuse related to the sensor circuit.

5. Can I continue driving my 2006 Nissan Altima Sedan with the P0037 code?

It is not recommended to drive your vehicle with the P0037 code present, as it can lead to poor engine performance and potentially cause further damage to the catalytic converter and other engine components.

6. How can I repair the HO2S12 heater control circuit low issue in my 2006 Nissan Altima Sedan?

To repair the P0037 code, you may need to replace the faulty oxygen sensor, repair any damaged wiring or connectors in the sensor circuit, replace the blown fuse if necessary, or reprogram the PCM.

7. Are there any tips to prevent the recurrence of the P0037 code in my 2006 Nissan Altima Sedan?

To prevent the P0037 code from recurring, it is important to perform regular maintenance on your vehicle, including checking the oxygen sensors during routine inspections and addressing any engine performance issues promptly.

8. How much does it typically cost to fix the P0037 code on a 2006 Nissan Altima Sedan?

The cost of fixing the P0037 code can vary depending on the specific issue causing the code. Repairs may range from $100 to $300 for parts and labor, but costs can be higher if additional components need replacement.

9. Can I reset the check engine light after fixing the P0037 code on my 2006 Nissan Altima Sedan?

Yes, you can reset the check engine light using an OBDII scanner after fixing the P0037 code. This will clear the error code from the vehicle's memory and turn off the check engine light on the dashboard.

10. Is it necessary to visit a mechanic to fix the P0037 code on my 2006 Nissan Altima Sedan, or can I do it myself?

While some DIY enthusiasts may be able to diagnose and repair the P0037 code themselves, it is recommended to consult a qualified mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.

Discuss the causes and fixes for P0037 2006 Nissan Altima Sedan OBDII Code

Code P0037 2006 Nissan Altima Sedan comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play