AutoCodes – Honda – P0034 2018 Honda CR-V

P0034 2018 Honda CR-V Code - Turbocharger Bypass Control Solenoid Valve Circuit Low Voltage

Quick Answer

The Turbocharger Bypass Control Solenoid Valve is activated by the Powertrain Control Module (PCM) to control the Turbocharger Bypass Control Solenoid Valve timing to improve boost response during acceleration immediately after deceleration and boost pressure decrease during deceleration. Common causes include Faulty Turbocharger Bypass Control Solenoid Valve, Turbocharger Bypass Control Solenoid Valve harness is open or shorted, Turbocharger Bypass Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0034 2018 Honda CR-V indicates Turbocharger Bypass Control Solenoid Valve Circuit Low Voltage.
Common causes: Common causes include Faulty Turbocharger Bypass Control Solenoid Valve, Turbocharger Bypass Control Solenoid Valve harness is open or shorted, Turbocharger Bypass Control Solenoid Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 317

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 25, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0034 2018 Honda CR-V Description

The Turbocharger Bypass Control Solenoid Valve is activated by the Powertrain Control Module (PCM) to control the Turbocharger Bypass Control Solenoid Valve timing to improve boost response during acceleration immediately after deceleration and boost pressure decrease during deceleration. The Turbocharger Bypass Control Solenoid Valve is normally closed (negative pressure side). If the return signal is CLOSE for a specified duration when the PCM outputs an OPEN signal to the Turbocharger Bypass Control Solenoid Valve, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0034 2018 Honda CR-V - Turbocharger Bypass Control Solenoid Valve Circuit Low Voltage - AutoCodes.com — P0034 2018 Honda CR-V Code - Turbocharger Bypass Control Solenoid Valve Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0034 2018 Honda CR-V?

Faulty Turbocharger Bypass Control Solenoid Valve
Turbocharger Bypass Control Solenoid Valve harness is open or shorted
Turbocharger Bypass Control Solenoid Valve circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0034 2018 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0034 2018 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0034 2018 Honda CR-V code?

Need more information on how to fix the P0034 2018 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0034 2018 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0034 2018 Honda CR-V Code

1. What are the common symptoms of OBDII code P0034 in a 2018 Honda CR-V?

The common symptoms of OBDII code P0034 in a 2018 Honda CR-V include reduced engine performance, decreased fuel efficiency, and the illumination of the Check Engine Light.

2. What does the OBDII code P0034 indicate in a 2018 Honda CR-V?

OBDII code P0034 in a 2018 Honda CR-V indicates a low voltage condition in the Turbocharger Bypass Control Solenoid Valve circuit.

3. What are the potential causes of OBDII code P0034 in a 2018 Honda CR-V?

Potential causes of OBDII code P0034 in a 2018 Honda CR-V include a faulty Turbocharger Bypass Control Solenoid Valve, damaged wiring or connectors in the circuit, or an issue with the engine control module.

4. How can I diagnose the OBDII code P0034 in my 2018 Honda CR-V?

To diagnose OBDII code P0034 in a 2018 Honda CR-V, you can use an OBDII scanner to read the code and then inspect the Turbocharger Bypass Control Solenoid Valve, check the wiring and connectors for damage, and test the voltage in the circuit.

5. What are the repair options for fixing OBDII code P0034 in a 2018 Honda CR-V?

Repair options for fixing OBDII code P0034 in a 2018 Honda CR-V may include replacing the Turbocharger Bypass Control Solenoid Valve, repairing any damaged wiring or connectors, or reprogramming the engine control module if necessary.

6. Can driving with OBDII code P0034 in a 2018 Honda CR-V cause further damage?

Continuing to drive with OBDII code P0034 in a 2018 Honda CR-V can potentially cause damage to the turbocharger system and affect the overall performance of the vehicle. It is recommended to address the issue promptly.

7. How much does it typically cost to repair OBDII code P0034 in a 2018 Honda CR-V?

The cost of repairing OBDII code P0034 in a 2018 Honda CR-V can vary depending on the specific underlying issue, but it may range from $200 to $500 or more, including parts and labor.

8. Can I reset the Check Engine Light after fixing OBDII code P0034 in my 2018 Honda CR-V?

After fixing OBDII code P0034 in a 2018 Honda CR-V, you can reset the Check Engine Light using an OBDII scanner or by disconnecting the car battery for a few minutes to clear the stored fault code.

9. Is it safe to drive my 2018 Honda CR-V with OBDII code P0034 if the symptoms are not severe?

While it may be tempting to drive with OBDII code P0034 in a 2018 Honda CR-V if the symptoms are mild, it is recommended to address the issue promptly to avoid potential long-term damage to the vehicle.

10. How can I prevent OBDII code P0034 from recurring in my 2018 Honda CR-V?

To prevent OBDII code P0034 from recurring in a 2018 Honda CR-V, it is essential to perform regular maintenance checks, address any engine-related issues promptly, and ensure the turbocharger system is functioning correctly.