P0022 2012 Ford Fusion Code - Camshaft Position 'A' Timing Over-Retarded Bank 2
Quick Answer
The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) position for an over-advanced camshaft timing. Common causes include Variable Camshaft Timing solenoid stuck open, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0022 2012 Ford Fusion indicates Camshaft Position 'A' Timing Over-Retarded Bank 2.
- Common causes
- Common causes include Variable Camshaft Timing solenoid stuck open, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0022 2012 Ford Fusion Description
What are the Possible Causes of the DTC P0022 2012 Ford Fusion?
- Variable Camshaft Timing solenoid stuck open
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0022 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0022 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0022 2012 Ford Fusion code?
Need more information on how to fix the P0022 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0022 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0022 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P0022 on a 2012 Ford Fusion?
The common symptoms of code P0022 include engine misfires, rough idling, reduced engine performance, and potentially stalling.
2. What does the OBDII code P0022 'Camshaft Position 'A' Timing Over-Retarded Bank 2' mean for a 2012 Ford Fusion?
This code indicates that the camshaft timing for Bank 2 is over-retarded, meaning that the timing is off beyond the acceptable parameters.
3. What are the possible causes of OBDII code P0022 on a 2012 Ford Fusion?
Possible causes of P0022 include a faulty camshaft position actuator, timing chain issues, oil flow problems to the actuator, or a malfunctioning engine control module.
4. How can I diagnose the OBDII code P0022 on my 2012 Ford Fusion?
Diagnosing code P0022 may involve inspecting the camshaft position sensor, checking the oil levels and quality, examining the timing chain, and scanning the engine control module for related faults.
5. Can driving with OBDII code P0022 on a 2012 Ford Fusion cause further damage?
Continuing to drive with code P0022 may potentially cause damage to the engine components, especially if the issue is related to the timing chain or camshaft actuator.
6. How can I repair OBDII code P0022 on a 2012 Ford Fusion?
Repairing P0022 may involve replacing the camshaft position actuator, addressing any timing chain problems, ensuring proper oil flow to the actuator, or reprogramming the engine control module.
7. Is it safe to reset the OBDII code P0022 on my 2012 Ford Fusion without fixing the underlying issue?
Resetting the code without addressing the root cause may temporarily clear the warning light, but the issue will likely resurface, potentially leading to more severe problems.
8. How much does it typically cost to fix OBDII code P0022 on a 2012 Ford Fusion?
The cost of fixing P0022 can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can I prevent OBDII code P0022 from appearing on my 2012 Ford Fusion?
Regular maintenance, timely oil changes, using high-quality oil, and addressing any warning signs promptly can help prevent issues that trigger code P0022.
10. Will OBDII code P0022 on a 2012 Ford Fusion affect the vehicle's emissions or fuel efficiency?
Yes, code P0022 can impact emissions and fuel efficiency due to improper camshaft timing, which affects combustion and overall engine performance.
Discuss the causes and fixes for P0022 2012 Ford Fusion OBDII Code
Code P0022 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
