P0022 2011 Ford Fusion Code - Camshaft Position 'A' Timing Over-Retarded Bank 2
Quick Answer
The Powertrain Control Module (PCM) monitors the Variable Camshaft Timing (VCT) position for an over-advanced camshaft timing. Common causes include Variable Camshaft Timing solenoid stuck open, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0022 2011 Ford Fusion indicates Camshaft Position 'A' Timing Over-Retarded Bank 2.
- Common causes
- Common causes include Variable Camshaft Timing solenoid stuck open, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0022 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0022 2011 Ford Fusion?
- Variable Camshaft Timing solenoid stuck open
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0022 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0022 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0022 2011 Ford Fusion code?
Need more information on how to fix the P0022 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0022 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0022 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0022 in a 2011 Ford Fusion?
- Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and difficulty starting the vehicle.
2. What does the OBDII code P0022 'Camshaft Position "A" Timing Over-Retarded Bank 2' mean for a 2011 Ford Fusion?
- This code indicates that the camshaft timing on bank 2 is over-retarded, causing issues with the engine's performance.
3. What are the possible causes of OBDII code P0022 in a 2011 Ford Fusion?
- Potential causes include a faulty camshaft sensor, issues with the variable valve timing (VVT) system, engine oil problems, or a timing chain/belt issue.
4. How can I diagnose the cause of OBDII code P0022 in my 2011 Ford Fusion?
- To diagnose the issue, you may need to inspect the camshaft sensors, check the VVT system for proper operation, verify the engine oil level and quality, and inspect the timing chain or belt for wear.
5. Can I continue driving my 2011 Ford Fusion with OBDII code P0022?
- It's not recommended to drive the vehicle with this code present, as it can lead to further engine damage and poor performance. It's best to address the issue promptly.
6. How can I repair OBDII code P0022 in my 2011 Ford Fusion?
- Repairs may involve replacing the camshaft sensor, addressing VVT system issues, ensuring proper engine oil levels and quality, and inspecting/replacing the timing chain or belt if necessary.
7. Is it possible to clear OBDII code P0022 in a 2011 Ford Fusion without fixing the underlying issue?
- Clearing the code without addressing the root cause may temporarily turn off the check engine light, but the issue will likely reoccur, leading to potential long-term engine problems.
8. Can a DIY enthusiast fix OBDII code P0022 in a 2011 Ford Fusion?
- Depending on the skill level and tools available, some DIY enthusiasts may be able to address simpler causes like replacing the camshaft sensor. However, more complex issues may require professional assistance.
9. How much does it typically cost to repair OBDII code P0022 in a 2011 Ford Fusion at a mechanic or dealership?
- Repair costs can vary depending on the exact cause of the code, but they may range from a few hundred to over a thousand dollars, including parts and labor.
10. How can I prevent OBDII code P0022 from occurring in my 2011 Ford Fusion in the future?
- Regular maintenance, such as changing the engine oil on time, using high-quality oil, and keeping up with recommended service intervals, can help prevent issues that lead to this code.
Discuss the causes and fixes for P0022 2011 Ford Fusion OBDII Code
Code P0022 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
