P0019 Suzuki Code - Crankshaft Position - Exhaust Camshaft Position Correlation Bank 2
Quick Answer
The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include The correct installation of the camshaft sensors, The correct installation of the crankshaft sensor, A timing chain tensioner condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0019 Suzuki indicates Crankshaft Position - Exhaust Camshaft Position Correlation Bank 2.
- Common causes
- Common causes include The correct installation of the camshaft sensors, The correct installation of the crankshaft sensor, A timing chain tensioner condition.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0019 Suzuki Description
Ignition voltage is supplied directly to the CMP actuator solenoid. The ECM controls the solenoid by grounding the control circuit with a solid-state device called a driver. The ECM compares the camshaft position or the camshaft angle, to the position of the crankshaft.
The Diagnostic Trouble Code (DTC) will set if the ECM detects a deviation in the relationship between a camshaft and the crankshaft.
What are the Possible Causes of the DTC P0019 Suzuki?
- The correct installation of the camshaft sensors
- The correct installation of the crankshaft sensor
- A timing chain tensioner condition
- An incorrectly installed timing chain
- Excessive play in the timing chain
- A timing chain that jumped teeth
How to Fix the DTC P0019 Suzuki?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0019 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0019 Suzuki code?
Need more information on how to fix the P0019 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0019 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0019 Suzuki Code
1. What are common symptoms of OBDII code P0019 in a Suzuki related to the crankshaft position and exhaust camshaft position correlation on Bank 2?
Symptoms may include rough idling, engine misfires, reduced power, poor fuel efficiency, and the illumination of the check engine light.
2. What are some possible causes of OBDII code P0019 in a Suzuki?
Potential causes include a faulty camshaft position sensor, issues with the timing belt or chain, incorrect oil viscosity or level, camshaft phaser problems, or a malfunctioning crankshaft position sensor.
3. How can I diagnose OBDII code P0019 in my Suzuki?
Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the camshaft and crankshaft sensors, checking the timing components, and ensuring proper oil levels and quality.
4. Is it safe to continue driving with OBDII code P0019 present in my Suzuki?
It is not recommended to drive extensively with this code present, as it can lead to further engine damage or failures. It's best to have the issue diagnosed and repaired promptly.
5. Can I reset the OBDII code P0019 in my Suzuki by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is not a permanent solution. The underlying issue causing the code will need to be addressed to prevent it from reoccurring.
6. Are there any DIY repair tips for resolving OBDII code P0019 in a Suzuki?
DIY repairs may include checking and cleaning sensor connections, ensuring proper oil levels and quality, and inspecting timing components for wear or damage. However, complex repairs may require professional assistance.
7. How much does it typically cost to repair OBDII code P0019 in a Suzuki?
The cost of repairs can vary significantly depending on the exact cause of the code. Costs may range from a few hundred to over a thousand dollars, especially if components like sensors or timing parts need replacement.
8. Can a mechanic easily fix OBDII code P0019 in a Suzuki?
Experienced mechanics should be able to diagnose and repair this code efficiently, especially if they have the necessary tools and expertise to work on Suzuki vehicles.
9. Will OBDII code P0019 cause permanent damage to my Suzuki if not addressed promptly?
Continued driving with this code present can potentially cause damage to the engine, especially if the underlying issue is related to timing components. It's advisable to address the problem as soon as possible.
10. How long does it typically take to repair OBDII code P0019 in a Suzuki?
The repair time can vary based on the exact cause of the code and the availability of parts. In general, it may take several hours to a full day for a mechanic to diagnose and repair the issue.
Discuss the causes and fixes for P0019 Suzuki OBDII Code
Code P0019 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
