P0017 Volvo Code - Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B'
Quick Answer
The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. Common causes include Mechanical timing fault, Blocked oil passage, Low oil level. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0017 Volvo indicates Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B'.
- Common causes
- Common causes include Mechanical timing fault, Blocked oil passage, Low oil level.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0017 Volvo Description
The Camshaft Position (CMP) sensor is triggered by a notched reluctor wheel built into the exhaust camshaft sprocket. The CMP sensor provides 6 signal pulses every camshaft revolution. Each notch, or feature of the reluctor wheel is of a different size for individual cylinder identification. This means the CMP and crankshaft position (CKP) signals are pulse width encoded to enable the PCM to constantly monitor their relationship. This relationship is used to determine camshaft actuator position and control its phasing at the correct value. The PCM also uses this signal to identify the compression stroke of each cylinder, and for sequential fuel injection. The CMP sensor is connected to the PCM by a 12-volt, low reference, and signal circuit.
What are the Possible Causes of the DTC P0017 Volvo?
- Mechanical timing fault
- Blocked oil passage
- Low oil level
- Faulty Exhaust ('B') Camshaft Position (CMP) Sensor
- Faulty Crankshaft Position (CKP) Sensor
How to Fix the DTC P0017 Volvo?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0017 Volvo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0017 Volvo code?
Need more information on how to fix the P0017 Volvo code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0017 Volvo code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0017 Volvo Code
1. What are the common symptoms of OBDII code P0017 in a Volvo related to Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor 'B'?
The common symptoms include rough idling, engine misfires, poor acceleration, and potentially stalling of the vehicle.
2. What are some possible causes of OBDII code P0017 in a Volvo?
Possible causes include a faulty camshaft or crankshaft position sensor, incorrect timing belt installation, issues with the timing chain, or a problem with the engine's variable valve timing system.
3. How can I diagnose the cause of OBDII code P0017 in my Volvo?
Diagnosing this code typically involves checking the camshaft and crankshaft position sensors, inspecting the timing belt or chain for proper alignment, and testing the variable valve timing components for proper operation.
4. Can driving with OBDII code P0017 in a Volvo cause further damage to the engine?
Continuing to drive with this code may lead to more severe engine issues, such as decreased fuel efficiency, engine damage due to poor timing, or even complete engine failure in extreme cases.
5. How can I repair OBDII code P0017 in my Volvo?
Repairing this code may involve replacing the faulty camshaft or crankshaft position sensor, correcting the timing belt or chain alignment, or repairing/replacing any damaged variable valve timing components.
6. Is it safe to clear the OBDII code P0017 in my Volvo without fixing the underlying issue?
Clearing the code without addressing the root cause is not recommended, as the problem will likely persist and may worsen over time, leading to potential engine damage.
7. How much does it typically cost to repair OBDII code P0017 in a Volvo?
The cost of repairing this code can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can a DIY enthusiast repair OBDII code P0017 in a Volvo at home?
While some experienced DIY enthusiasts may be able to diagnose and repair this code at home, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair to prevent further damage.
9. How long can I safely drive my Volvo with OBDII code P0017 before getting it repaired?
It is best to address this issue as soon as possible to avoid potential engine damage. Continuing to drive the vehicle with this code present may lead to more severe problems over time.
10. Are there any preventative maintenance steps I can take to reduce the likelihood of encountering OBDII code P0017 in my Volvo?
Regularly servicing and maintaining your vehicle, including following the manufacturer's recommended maintenance schedule for timing belt/chain replacement and sensor inspections, can help reduce the risk of encountering this code.
Discuss the causes and fixes for P0017 Volvo OBDII Code
Code P0017 Volvo comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
