P0017 Isuzu Code - Crankshaft Position-Exhaust Camshaft Position Correlation
Quick Answer
The Crankshaft Position (CKP) sensor is a permanent magnet generator, known as a variable reluctance sensor. Common causes include Dirty Oil, Engine mechanical problems, Faulty camshaft position sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0017 Isuzu indicates Crankshaft Position-Exhaust Camshaft Position Correlation.
- Common causes
- Common causes include Dirty Oil, Engine mechanical problems, Faulty camshaft position sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0017 Isuzu Description
The Camshaft Position (CMP) sensor is triggered by a notched reluctor wheel built into the exhaust camshaft sprocket. The CMP sensor provides 6 signal pulses for every camshaft revolution. Each notch, or feature of the reluctor wheel is of a different size for individual cylinder identification. This means the CMP and crankshaft position (CKP) signals are pulse width encoded to enable the PCM to constantly monitor their relationship. This relationship is used to determine camshaft actuator position and control its phasing at the correct value. The PCM also uses this signal to identify the compression stroke of each cylinder, and for sequential fuel injection. The CMP sensor is connected to the PCM by a 12-volt, low reference, and signal circuit.
What are the Possible Causes of the DTC P0017 Isuzu?
- Dirty Oil
- Engine mechanical problems
- Faulty camshaft position sensor
- Faulty crankshaft position sensor
How to Fix the DTC P0017 Isuzu?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0017 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0017 Isuzu code?
Need more information on how to fix the P0017 Isuzu code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0017 Isuzu code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0017 Isuzu Code
1. What are the common symptoms of OBDII code P0017 in an Isuzu?
- Common symptoms include rough idling, engine misfires, reduced fuel efficiency, and potential stalling while driving.
2. What does the OBDII code P0017 on an Isuzu indicate?
- OBDII code P0017 indicates a problem with the correlation between the crankshaft position sensor and the exhaust camshaft position sensor.
3. What are the possible causes of OBDII code P0017 in an Isuzu?
- Possible causes include a faulty camshaft position sensor, timing chain issues, incorrect oil viscosity, or problems with the variable valve timing (VVT) system.
4. How can I diagnose the cause of OBDII code P0017 in my Isuzu?
- Diagnosing the issue involves checking the camshaft and crankshaft sensors, inspecting the timing chain, verifying oil levels and condition, and testing the VVT system.
5. Can driving with OBDII code P0017 in an Isuzu cause further damage?
- Continuing to drive with code P0017 may lead to engine damage, reduced performance, and potential engine failure, so it is best to address the issue promptly.
6. How can I repair OBDII code P0017 on my Isuzu?
- Repairs may involve replacing the camshaft position sensor, addressing timing chain problems, ensuring proper oil levels and quality, or repairing issues with the VVT system.
7. Is it safe to drive my Isuzu with code P0017 if the symptoms are not severe?
- It is not recommended to drive the vehicle with code P0017, as unresolved issues can lead to further damage and potentially unsafe driving conditions.
8. How much does it typically cost to repair OBDII code P0017 on an Isuzu?
- The cost of repairs for code P0017 can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can I clear OBDII code P0017 on my Isuzu with a diagnostic tool, or does it require professional intervention?
- While you can clear the code with a diagnostic tool, it is essential to address the underlying issue causing code P0017 to prevent it from reoccurring.
10. How often does OBDII code P0017 occur in Isuzu vehicles, and is it a common issue?
- OBDII code P0017 can occur in Isuzu vehicles, particularly in models with variable valve timing systems, but it may not be as common as other codes.
Discuss the causes and fixes for P0017 Isuzu OBDII Code
-
Engine started shutting off at 42,000 miles. Took it to Isuzu service center and they replaced the engine gave me a 20,000 mile warranty and now at 107,000 miles same issue. Code P0017 Crankshaft needs replaced they gave me a estimate of $12,270.00. Looks like I’m getting a new vehicle and it won’t be an Isuzu, Chevy Colorado I was told had the same issue.
-
I'm sorry to heard you have that problem. Have you got a second opinion? did they ever try to replace just the sensors?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
