AutoCodes – Toyota – P0017 2018 Toyota RAV4

P0017 2018 Toyota RAV4 Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'

Quick Answer

In the Variable Valve Timing (VVT) system, the appropriate intake and exhaust valve open and close timing is controlled by the Engine Control Module (ECM). Common causes include Low or Dirty Engine Oil, Oil control valve filter, Faulty Camshaft Timing Oil Control Valve Assembly (for exhaust camshaft). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0017 2018 Toyota RAV4 indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'.
Common causes: Common causes include Low or Dirty Engine Oil, Oil control valve filter, Faulty Camshaft Timing Oil Control Valve Assembly (for exhaust camshaft).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,657

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0017 2018 Toyota RAV4 Description

In the Variable Valve Timing (VVT) system, the appropriate intake and exhaust valve open and close timing is controlled by the Engine Control Module (ECM). The ECM performs intake and exhaust valve control by performing the following: 1) controlling the camshaft and camshaft timing oil control valve assembly and operating the camshaft timing gear; and 2) changing the relative positions of the camshaft and crankshaft. To monitor the correlation of the exhaust camshaft position and crankshaft position, the ECM checks the VVT learned value while the engine is idling. The VVT learned value is calibrated based on the camshaft position and crankshaft position. The exhaust valve timing is set to the most advanced angle while the engine is idling. If the VVT learned value is out of the specified range in consecutive driving cycles, the ECM illuminates the MIL and stores Diagnostic Trouble Code (DTC) P0017.

OBDII Code P0017 2018 Toyota RAV4 - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B' - AutoCodes.com — P0017 2018 Toyota RAV4 Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'

What does this mean?

What are the Possible Causes of the DTC P0017 2018 Toyota RAV4?

Low or Dirty Engine Oil
Oil control valve filter
Faulty Camshaft Timing Oil Control Valve Assembly (for exhaust camshaft)
Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0017 2018 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0017 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0017 2018 Toyota RAV4 code?

Need more information on how to fix the P0017 2018 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0017 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0017 2018 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0017 in a 2018 Toyota RAV4?

- Common symptoms include rough idling, reduced engine performance, engine misfires, and illuminated Check Engine light.

2. What does the OBDII code P0017 indicating "Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'B'" mean in a 2018 Toyota RAV4?

- This code indicates that there is a misalignment between the crankshaft position sensor and the camshaft position sensor in Bank 1.

3. What are the possible causes of OBDII code P0017 in a 2018 Toyota RAV4?

- Potential causes include a faulty camshaft position sensor, a faulty crankshaft position sensor, timing chain issues, engine oil problems, or wiring/connectivity issues.

4. How can I diagnose the OBDII code P0017 in my 2018 Toyota RAV4?

- Diagnosis involves checking the camshaft and crankshaft sensors for proper functioning, inspecting the timing chain for wear or slack, and ensuring there are no oil flow issues.

5. Can I continue driving my 2018 Toyota RAV4 with OBDII code P0017?

- It is not recommended to drive with this code illuminated as it can lead to further engine damage or performance issues. It's best to address the underlying problem promptly.

6. How can I repair OBDII code P0017 in my 2018 Toyota RAV4?

- Repair may involve replacing the camshaft or crankshaft position sensors, repairing or replacing the timing chain, addressing engine oil issues, or fixing any wiring problems.

7. Are there any DIY tips for resolving OBDII code P0017 in a 2018 Toyota RAV4?

- While basic checks like inspecting sensor connections and ensuring proper engine oil levels can be done, diagnosing and repairing this code often require professional expertise and tools.

8. Will resetting the OBDII system clear the P0017 code in my 2018 Toyota RAV4?

- Resetting the system may temporarily clear the code, but if the underlying issue causing the code is not fixed, the Check Engine light and code will likely reappear.

9. How much does it typically cost to repair OBDII code P0017 in a 2018 Toyota RAV4?

- The cost of repair can vary based on the specific cause, but it may range from a few hundred to over a thousand dollars, depending on the parts and labor required.

10. Can OBDII code P0017 in a 2018 Toyota RAV4 cause long-term damage if left unaddressed?

- Ignoring this code can potentially lead to serious engine damage over time, affecting performance and reliability, so it's important to address it promptly.