AutoCodes – Suzuki – P0016 Suzuki

P0016 Suzuki Code - Crankshaft Position - Intake Camshaft Position Correlation Bank 1

Quick Answer

The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include The correct installation of the camshaft sensors, The correct installation of the crankshaft sensor, A timing chain tensioner condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0016 Suzuki indicates Crankshaft Position - Intake Camshaft Position Correlation Bank 1.
Common causes: Common causes include The correct installation of the camshaft sensors, The correct installation of the crankshaft sensor, A timing chain tensioner condition.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,793

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 24, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0016 Suzuki Description

The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. The CMP actuator solenoid signal from the ECM is Pulse Width Modulated (PWM). The ECM controls the CMP actuator solenoid duty cycle by controlling the amount of solenoid ON time. The CMP actuator solenoid controls the advance or the retard of each camshaft. The CMP actuator solenoid controls the oil flow that applies the pressure to advance or retard the camshafts.
Ignition voltage is supplied directly to the CMP actuator solenoid. The ECM controls the solenoid by grounding the control circuit with a solid-state device called a driver. The ECM compares the camshaft position or the camshaft angle, to the position of the crankshaft.
The Diagnostic Trouble Code (DTC) will set if the ECM detects a deviation in the relationship between a camshaft and the crankshaft.

OBDII Code P0016 Suzuki - Crankshaft Position - Intake Camshaft Position Correlation Bank 1 - AutoCodes.com — P0016 Suzuki Code - Crankshaft Position - Intake Camshaft Position Correlation Bank 1

What does this mean?

What are the Possible Causes of the DTC P0016 Suzuki?

The correct installation of the camshaft sensors
The correct installation of the crankshaft sensor
A timing chain tensioner condition
An incorrectly installed timing chain
Excessive play in the timing chain
A timing chain that jumped teeth

How to Fix the DTC P0016 Suzuki?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0016 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0016 Suzuki code?

Need more information on how to fix the P0016 Suzuki code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0016 Suzuki code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0016 Suzuki Code

1. What are the common symptoms of OBDII code P0016 in a Suzuki vehicle?

The common symptoms of code P0016 include rough idling, engine misfires, poor fuel efficiency, and difficulty starting the engine.

2. What does the OBDII code P0016 in a Suzuki indicate?

Code P0016 indicates a correlation problem between the crankshaft position sensor and the intake camshaft position sensor on Bank 1 in the engine.

3. What are the possible causes of OBDII code P0016 in a Suzuki?

Possible causes of code P0016 in a Suzuki include a faulty camshaft position sensor, a faulty crankshaft position sensor, timing chain issues, engine oil sludge, or a problem with the engine control module.

4. How can I diagnose the OBDII code P0016 in my Suzuki?

Diagnosing code P0016 typically involves using a diagnostic scan tool to read the code, checking the engine for any visible damage or oil leaks, and testing the camshaft and crankshaft sensors for proper functionality.

5. Can I drive my Suzuki with OBDII code P0016?

It is not recommended to drive your Suzuki with code P0016 as this issue can lead to further engine damage or poor performance. It is best to address the problem promptly.

6. How can I repair OBDII code P0016 in my Suzuki?

Repairing code P0016 may involve replacing the camshaft position sensor, the crankshaft position sensor, or repairing any timing chain issues. It is recommended to consult a professional mechanic for accurate diagnosis and repair.

7. Is OBDII code P0016 a serious issue in a Suzuki?

Code P0016 should be taken seriously as it can affect the performance and reliability of your Suzuki. Ignoring this code may lead to more severe engine problems over time.

8. Can a DIY enthusiast fix OBDII code P0016 in a Suzuki?

While some aspects of diagnosing and repairing code P0016 can be done by a DIY enthusiast, it is recommended to seek professional help to ensure the accurate diagnosis and proper repair of the issue.

9. How much does it cost to fix OBDII code P0016 in a Suzuki?

The cost of fixing code P0016 in a Suzuki can vary depending on the exact cause of the issue and the extent of the repairs needed. It is advisable to get a few quotes from different mechanics for an accurate estimate.

10. How can I prevent OBDII code P0016 from occurring in my Suzuki?

To prevent code P0016, it is essential to perform regular maintenance on your Suzuki, including oil changes, checking the timing components, and addressing any engine issues promptly.