AutoCodes – Toyota – P0016 2014 Toyota RAV4

P0016 2014 Toyota RAV4 Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'

Quick Answer

In the Variable Valve Timing (VVT) system, the appropriate intake and exhaust valve open and close timing is controlled by the Engine Control Module (ECM). Common causes include Low or Dirty Engine Oil, Oil control valve filter, Faulty Camshaft Timing Oil Control Valve Assembly (for intake camshaft). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0016 2014 Toyota RAV4 indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'.
Common causes: Common causes include Low or Dirty Engine Oil, Oil control valve filter, Faulty Camshaft Timing Oil Control Valve Assembly (for intake camshaft).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 372

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0016 2014 Toyota RAV4 Description

In the Variable Valve Timing (VVT) system, the appropriate intake and exhaust valve open and close timing is controlled by the Engine Control Module (ECM). The ECM performs intake and exhaust valve control by performing the following: 1) controlling the camshaft and camshaft timing oil control valve assembly and operating the camshaft timing gear; and 2) changing the relative positions of the camshaft and crankshaft. To monitor the correlation of the intake camshaft position and crankshaft position, the ECM checks the VVT learned value while the engine is idling. The VVT learned value is calibrated based on the camshaft position and crankshaft position. The intake valve timing is set to the most retarded angle while the engine is idling. If the VVT learned value is out of the specified range in consecutive driving cycles, the ECM illuminates the MIL and stores Diagnostic Trouble Code (DTC) P0016.

OBDII Code P0016 2014 Toyota RAV4 - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A' - AutoCodes.com — P0016 2014 Toyota RAV4 Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'

What does this mean?

What are the Possible Causes of the DTC P0016 2014 Toyota RAV4?

Low or Dirty Engine Oil
Oil control valve filter
Faulty Camshaft Timing Oil Control Valve Assembly (for intake camshaft)
Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
Faulty Engine Control Module (ECM)

How to Fix the DTC P0016 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0016 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0016 2014 Toyota RAV4 code?

Need more information on how to fix the P0016 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0016 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0016 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P0016 in a 2014 Toyota RAV4?

When the code P0016 is triggered, you may experience rough idling, poor acceleration, engine misfires, and potentially stalling of the vehicle.

2. What does the OBDII code P0016 in a 2014 Toyota RAV4 indicate?

OBDII code P0016 typically indicates a problem with the correlation between the crankshaft position sensor and the camshaft position sensor in Bank 1 Sensor 'A'.

3. What are the possible causes of OBDII code P0016 in a 2014 Toyota RAV4?

Common causes of code P0016 include a faulty camshaft or crankshaft position sensor, timing belt issues, engine mechanical problems, or a malfunctioning variable valve timing (VVT) system.

4. How can I diagnose the OBDII code P0016 in my 2014 Toyota RAV4?

Diagnosing code P0016 usually involves inspecting the camshaft and crankshaft position sensors, checking the timing belt for wear or misalignment, and testing the VVT system for proper operation.

5. Can I continue driving my 2014 Toyota RAV4 with OBDII code P0016?

It is not recommended to continue driving your vehicle with code P0016 as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

6. Is it possible to repair OBDII code P0016 in a 2014 Toyota RAV4 myself?

While some DIY enthusiasts may attempt to address code P0016 themselves, it is recommended to have a professional mechanic diagnose and repair the issue due to the complexity of the components involved.

7. How much does it typically cost to repair OBDII code P0016 in a 2014 Toyota RAV4?

The cost of repairing code P0016 can vary depending on the root cause of the issue and the labor rates in your area. It is advisable to obtain quotes from different mechanics to compare prices.

8. Can a faulty oil control valve cause OBDII code P0016 in a 2014 Toyota RAV4?

Yes, a malfunctioning oil control valve, which is part of the VVT system, can contribute to triggering code P0016 by affecting the timing of the camshaft in relation to the crankshaft.

9. Will resetting the OBDII code P0016 in a 2014 Toyota RAV4 make it go away permanently?

Simply resetting the code without addressing the underlying issue will not make it disappear permanently. The problem causing the code needs to be identified and fixed to prevent it from recurring.

10. How long does it typically take to repair OBDII code P0016 in a 2014 Toyota RAV4?

The repair time for code P0016 can vary depending on the specific cause of the issue and the availability of parts. It is best to consult with your mechanic for an estimated repair timeline.