AutoCodes – Chevrolet – P0016 2014 Chevrolet Silverado

P0016 2014 Chevrolet Silverado Code - Crankshaft Position - Intake Camshaft Position Not Plausible

Quick Answer

The Camshaft Position (CMP) actuator system is controlled by the control module. Common causes include Low oil level, Mechanical timing fault (stretched timing chain or damaged timing chain tensioner), Blocked oil passage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0016 2014 Chevrolet Silverado indicates Crankshaft Position - Intake Camshaft Position Not Plausible.
Common causes: Common causes include Low oil level, Mechanical timing fault (stretched timing chain or damaged timing chain tensioner), Blocked oil passage.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,062

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0016 2014 Chevrolet Silverado Description

The Camshaft Position (CMP) actuator system is controlled by the control module. The Engine Control Module (ECM) sends a pulse width modulated signal to a CMP actuator solenoid in order to control the amount of engine oil flow to a camshaft actuator passage. There are 2 different passages for oil to flow through, a passage for CAM advance and a passage for CAM retard. The camshaft actuator is attached to the front of the camshaft and is hydraulically operated in order to change the angle of the camshaft relative to the Crankshaft Position (CKP). Engine Oil Pressure (EOP), viscosity, temperature, engine oil level, and aftermarket engine oil additives can have an adverse effect on camshaft phaser performance. The Diagnostic Trouble Code (DTC) will be set when the ECM compares the signals of the crankshaft position sensor and both camshaft position sensors to detect if the signals are out of sync.

OBDII Code P0016 2014 Chevrolet Silverado - Crankshaft Position - Intake Camshaft Position Not Plausible - AutoCodes.com — P0016 2014 Chevrolet Silverado Code - Crankshaft Position - Intake Camshaft Position Not Plausible

What does this mean?

What are the Possible Causes of the DTC P0016 2014 Chevrolet Silverado?

Low oil level
Mechanical timing fault (stretched timing chain or damaged timing chain tensioner)
Blocked oil passage
Faulty Intake ('A') Camshaft Position (CMP) Sensor
Faulty Crankshaft Position (CKP) Sensor

How to Fix the DTC P0016 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0016 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0016 2014 Chevrolet Silverado code?

Need more information on how to fix the P0016 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0016 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0016 2014 Chevrolet Silverado Code

1. What does OBDII code P0016 on a 2014 Chevrolet Silverado indicate?

The P0016 code signifies a crankshaft position - intake camshaft position correlation error.

2. What are common symptoms of a P0016 code in a 2014 Chevrolet Silverado?

Common symptoms include engine misfires, rough idling, decreased fuel efficiency, and potential stalling.

3. What are some possible causes of a P0016 code in a 2014 Chevrolet Silverado?

Causes can include a faulty camshaft or crankshaft position sensor, timing chain issues, engine mechanical problems, or a malfunctioning VVT system.

4. How can I diagnose a P0016 code on my 2014 Chevrolet Silverado?

Diagnosis involves checking the camshaft and crankshaft sensors, inspecting the timing chain for proper alignment, and testing the VVT system for faults.

5. Can driving with a P0016 code in a 2014 Chevrolet Silverado cause further damage?

Continuing to drive with a P0016 code may lead to engine damage due to incorrect camshaft timing, so it is best to address the issue promptly.

6. How can I repair a P0016 code on my 2014 Chevrolet Silverado?

Repair options may include replacing the camshaft or crankshaft position sensors, correcting timing chain alignment, repairing any engine mechanical issues, or fixing VVT system components.

7. Is it safe to continue driving my 2014 Chevrolet Silverado with a P0016 code?

It is not recommended to drive your vehicle with a P0016 code as it can lead to performance issues and potential engine damage.

8. Can a P0016 code on a 2014 Chevrolet Silverado be triggered by a loose timing chain?

Yes, a loose or improperly aligned timing chain can cause the P0016 code to appear due to the correlation error between the crankshaft and camshaft positions.

9. How much does it typically cost to repair a P0016 code on a 2014 Chevrolet Silverado?

The cost of repairs for a P0016 code can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Will resetting the OBDII system clear a P0016 code on a 2014 Chevrolet Silverado?

Resetting the system may temporarily clear the code, but if the underlying issue causing the P0016 code is not addressed, it is likely to reappear during driving.