AutoCodes - Toyota - P0016 2009 TOYOTA CAMRY

P0016 2009 TOYOTA CAMRY Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0016 2009 TOYOTA CAMRY code possible causes

  • Dirty Oil
  • Timing Chain Has Jumped a Tooth or Stretched
  • Faulty Variable Valve Timing (VVT) sensor
  • Variable Valve Timing (VVT) sensor circuit is open or shorted
  • Variable Valve Timing (VVT) sensor poor electrical connection
  • Damaged Engine Control Module (ECM)

|How do I fix the P0016 2009 TOYOTA CAMRY code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the P0016 2009 TOYOTA CAMRY code

Labor: 1.0

The cost of diagnosing the P0016 2009 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0016 2009 TOYOTA CAMRY code detected?

The Engine Control Module (ECM) set code P0016 when no receives no signal from the Variable Valve Timing (VVT) sensor.

|What are P0016 2009 TOYOTA CAMRY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/Loss of power
  • Engine rough idle

|P0016 2009 TOYOTA CAMRY code description

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard. Optimizing engine timing will help the engine improve torque and fuel economy, and the exhaust emissions decrease under overall driving conditions. The Variable Valve Timing (VVT) system includes the Oil Control Valve (OCV) and VVT controller. The ECM detects the actual intake valve timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.
OBDII Code P0016 2009 Toyota Camry - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A' - AutoCodes.com

|Need more information with the P0016 2009 TOYOTA CAMRY code?

Need more information on how to fix the P0016 2009 TOYOTA CAMRY code? Get Access to Factory Service Manuals

|Need help with a P0016 2009 TOYOTA CAMRY code?

Get the P0016 2009 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

|P0016 2009 TOYOTA CAMRY code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0016 2009 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?