P0016 2007 Ford Fusion Code - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'
Quick Answer
This Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects Variable Camshaft Timing (VCT) position misalignment between the camshaft and crankshaft. Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0016 2007 Ford Fusion indicates Crankshaft Position Camshaft Position Correlation Bank 1 Sensor 'A'.
- Common causes
- Common causes include Camshaft timing incorrectly set, Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber, Erratic camshaft position due to low oil pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0016 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0016 2007 Ford Fusion?
- Camshaft timing incorrectly set
- Continuous oil flow to the Variable Camshaft Timing (VCT) piston chamber
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the VCT valve body
- VCT solenoid stuck in position
- Faulty Variable Camshaft Timing
- Variable Camshaft Timing harness is open or shorted
- Variable Camshaft Timing circuit poor electrical connection
- Damaged camshaft position (CMP) sensor
- Open or short in the CMP sensor circuits
- Radio frequency interference (RFI) interference
How to Fix the DTC P0016 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0016 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0016 2007 Ford Fusion code?
Need more information on how to fix the P0016 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0016 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0016 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0016 in a 2007 Ford Fusion?
- Common symptoms include rough idling, engine misfires, poor acceleration, and the Check Engine light illuminated on the dashboard.
2. What does the OBDII code P0016 in a 2007 Ford Fusion indicate?
- The code P0016 means that there is a correlation problem between the crankshaft position sensor and the camshaft position sensor on Bank 1 Sensor 'A'.
3. What are some possible causes of OBDII code P0016 in a 2007 Ford Fusion?
- Possible causes include a faulty camshaft position sensor, a faulty crankshaft position sensor, timing chain or belt issues, engine oil problems, or wiring/connectivity issues.
4. How can I diagnose the cause of OBDII code P0016 in my 2007 Ford Fusion?
- A proper diagnostic scan tool can help pinpoint the exact cause by checking the signals from the camshaft and crankshaft position sensors, as well as inspecting the timing components and oil levels.
5. Can driving with OBDII code P0016 in a 2007 Ford Fusion cause further damage?
- Continuing to drive with this code can potentially lead to engine damage due to incorrect timing, so it is advised to address the issue promptly.
6. Is it safe to continue driving my 2007 Ford Fusion with OBDII code P0016?
- It is not recommended to drive the vehicle with code P0016 as it can result in poor engine performance and potential long-term damage.
7. How can I repair OBDII code P0016 in my 2007 Ford Fusion?
- Repair typically involves replacing the faulty camshaft or crankshaft position sensor, addressing timing chain/belt issues, ensuring proper engine oil levels, and fixing any wiring problems.
8. Can I reset the Check Engine light after repairing OBDII code P0016 in my 2007 Ford Fusion?
- Yes, the Check Engine light can be reset using an OBDII scanner after the issue has been resolved to clear the code and ensure proper functioning.
9. How much does it cost to fix OBDII code P0016 in a 2007 Ford Fusion?
- The cost of repairs can vary depending on the exact cause of the code and labor rates, but it is advisable to budget for sensor replacement and potential timing system repairs.
10. Are there any preventive measures to avoid OBDII code P0016 in a 2007 Ford Fusion?
- Regular maintenance, such as timely oil changes and inspections, can help prevent issues that may lead to code P0016. Additionally, addressing any warning signs promptly can help avoid further complications.
Discuss the causes and fixes for P0016 2007 Ford Fusion OBDII Code
Code P0016 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
