P0014 Saab Code - Exhaust Camshaft Position System Performance
Quick Answer
The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 Saab indicates Exhaust Camshaft Position System Performance.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0014 Saab Description
What are the Possible Causes of the DTC P0014 Saab?
- Dirty Oil
- Low engine oil level
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0014 Saab?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2004-2009 Saab 97x Factory Service Bulletin OBDII Code P0014
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0014 Saab code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0014 Saab code?
Need more information on how to fix the P0014 Saab code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 Saab code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 Saab Code
1. What are the common symptoms of OBDII code P0014 in a Saab related to the Exhaust Camshaft Position System Performance?
The common symptoms include rough idling, reduced engine performance, poor fuel economy, and in some cases, the Check Engine Light may illuminate.
2. What are the possible causes of the OBDII code P0014 in a Saab?
The code P0014 in a Saab is often caused by issues with the Exhaust Camshaft Position Actuator Solenoid, faulty camshaft position sensors, timing chain problems, or engine oil issues.
3. Can driving with OBDII code P0014 in a Saab cause further damage?
Continuing to drive with code P0014 in a Saab can potentially cause damage to the engine over time, as it may lead to issues with the camshaft timing and overall engine performance.
4. How can I diagnose the OBDII code P0014 in a Saab?
Diagnosing code P0014 in a Saab typically involves using a scan tool to check for the specific error code, inspecting the camshaft position sensors, examining the timing chain, and testing the Exhaust Camshaft Position Actuator Solenoid.
5. Is it safe to continue driving my Saab with OBDII code P0014 if the symptoms are not severe?
It is not recommended to continue driving your Saab with code P0014 even if the symptoms are not severe, as it can lead to further engine damage over time. It is best to address the issue promptly.
6. What are some repair tips for fixing OBDII code P0014 in a Saab?
Repairing code P0014 in a Saab may involve replacing the Exhaust Camshaft Position Actuator Solenoid, inspecting and potentially replacing the camshaft position sensors, checking and adjusting the timing chain, and ensuring proper engine oil levels and quality.
7. How long does it typically take to repair OBDII code P0014 in a Saab?
The repair time for code P0014 in a Saab can vary depending on the exact cause of the issue and the extent of the repairs needed. It may take a few hours to a full day to complete the repairs.
8. Can I reset the Check Engine Light after fixing OBDII code P0014 in a Saab?
Once the underlying issue causing code P0014 in a Saab is fixed, you can reset the Check Engine Light using a scan tool or by disconnecting the car's battery for a few minutes. If the light persists, further diagnostics may be needed.
9. How much does it cost to repair OBDII code P0014 in a Saab?
The cost of repairing code P0014 in a Saab can vary depending on the specific repairs needed, parts required, and labor costs in your area. It is recommended to obtain quotes from local mechanics or dealerships for an accurate estimate.
10. Can I prevent OBDII code P0014 from recurring in my Saab?
To help prevent code P0014 from recurring in your Saab, it is important to maintain regular engine oil changes, follow manufacturer's recommended maintenance schedules, and address any engine performance issues promptly to avoid potential camshaft timing problems.
Discuss the causes and fixes for P0014 Saab OBDII Code
Code P0014 Saab comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
