P0014 Cadillac Code - Exhaust Camshaft Position System Performance
Quick Answer
The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 Cadillac indicates Exhaust Camshaft Position System Performance.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0014 Cadillac Description
What are the Possible Causes of the DTC P0014 Cadillac?
- Dirty Oil
- Low engine oil level
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0014 Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
In rare instances, the P0011 and or P0014 diagnostic codes are set in the ECM as history or current. If the diagnostics do not lead to a resolution, remove the camshaft solenoids, and inspect the screens for debris. If debris is present, clean off the screens with brake cleaner. Reinstall the solenoids and evaluate if the DTC still sets. If the code resets or the screen does not have debris on them, remove the camshaft actuator associated with the DTC(s). With light air pressure, blow out the oil passages through the camshaft actuator solenoid port in the head while holding a rag over the camshaft actuator oil passages to keep the oil from spraying out all over the vehicle/engine. Lubricate the camshaft solenoid seal(s) with clean engine oil and reinstall. Install a new camshaft actuator associated with the code(s). Evaluate the vehicle and monitor the camshaft actuator activity.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0014 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0014 Cadillac code?
Need more information on how to fix the P0014 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 Cadillac Code
1. What are the common symptoms of OBDII code P0014 in a Cadillac related to the Exhaust Camshaft Position System Performance?
- Common symptoms include rough idling, reduced engine performance, engine misfires, and the illumination of the Check Engine Light.
2. What are the typical causes of OBDII code P0014 in a Cadillac?
- The code P0014 in a Cadillac is often caused by issues with the exhaust camshaft position actuator solenoid, faulty wiring, low engine oil levels, or a malfunctioning camshaft position sensor.
3. How can I diagnose the OBDII code P0014 in my Cadillac?
- Diagnosing code P0014 involves checking the exhaust camshaft position actuator for proper operation, inspecting the wiring for any damage, verifying the engine oil level, and testing the camshaft position sensor.
4. Can I drive my Cadillac with OBDII code P0014?
- It is not recommended to drive your Cadillac with code P0014 as it can lead to further engine damage and potential safety issues. It is best to address the issue promptly.
5. How can I repair OBDII code P0014 in my Cadillac?
- Repair options for code P0014 may include replacing the exhaust camshaft position actuator solenoid, repairing any damaged wiring, ensuring proper engine oil levels, or replacing the camshaft position sensor if necessary.
6. Are there any DIY tips for fixing OBDII code P0014 in a Cadillac?
- While some repairs for code P0014 may be DIY-friendly, it is recommended to consult a professional mechanic to accurately diagnose and repair the issue to avoid causing further damage.
7. Will resetting the Check Engine Light resolve OBDII code P0014 in my Cadillac?
- Resetting the Check Engine Light may temporarily turn it off, but it will not fix the underlying issue causing code P0014. It is important to address the root cause of the problem to prevent future occurrences.
8. How much does it typically cost to fix OBDII code P0014 in a Cadillac?
- The cost of repairing code P0014 in a Cadillac can vary depending on the specific cause of the issue, the labor rates in your area, and whether you choose to go to a dealership or an independent mechanic. Costs may range from a few hundred to over a thousand dollars.
9. Can a faulty camshaft position sensor trigger OBDII code P0014 in a Cadillac?
- Yes, a malfunctioning camshaft position sensor can contribute to triggering OBDII code P0014 in a Cadillac as it plays a crucial role in monitoring the position of the camshaft.
10. How often does OBDII code P0014 occur in Cadillac vehicles?
- OBDII code P0014 related to the Exhaust Camshaft Position System Performance is a common issue in Cadillac vehicles, particularly in models with variable valve timing systems.
Discuss the causes and fixes for P0014 Cadillac OBDII Code
Code P0014 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
