P0014 Buick Code - Exhaust Camshaft Position System Performance
Quick Answer
The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0014 Buick indicates Exhaust Camshaft Position System Performance.
- Common causes
- Common causes include Dirty Oil, Low engine oil level, Faulty Exhaust Camshaft Position Actuator Solenoid.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0014 Buick Description
What are the Possible Causes of the DTC P0014 Buick?
- Dirty Oil
- Low engine oil level
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0014 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
In rare instances, the P0011 and or P0014 diagnostic codes are set in the ECM as history or current. If the diagnostics do not lead to a resolution, remove the camshaft solenoids, and inspect the screens for debris. If debris is present, clean off the screens with brake cleaner. Reinstall the solenoids and evaluate if the DTC still sets. If the code resets or the screen does not have debris on them, remove the camshaft actuator associated with the DTC(s). With light air pressure, blow out the oil passages through the camshaft actuator solenoid port in the head while holding a rag over the camshaft actuator oil passages to keep the oil from spraying out all over the vehicle/engine. Lubricate the camshaft solenoid seal(s) with clean engine oil and reinstall. Install a new camshaft actuator associated with the code(s). Evaluate the vehicle and monitor the camshaft actuator activity.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0014 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0014 Buick code?
Need more information on how to fix the P0014 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0014 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0014 Buick Code
1. What are common symptoms of OBDII code P0014 in a Buick related to the exhaust camshaft position system performance?
When experiencing code P0014 in a Buick, common symptoms may include rough idling, poor engine performance, decreased fuel efficiency, and potential stalling.
2. What are the typical causes of OBDII code P0014 in a Buick indicating an issue with the exhaust camshaft position system performance?
The most common causes of code P0014 in a Buick are a faulty camshaft position actuator solenoid, worn timing chain, engine oil issues, or a malfunctioning camshaft position sensor.
3. How can I diagnose OBDII code P0014 in my Buick related to the exhaust camshaft position system performance?
Diagnosing code P0014 involves checking the camshaft position actuator solenoid, inspecting the timing chain for wear, testing the engine oil quality and level, and verifying the functionality of the camshaft position sensor.
4. What are some repair tips for addressing OBDII code P0014 in a Buick associated with the exhaust camshaft position system performance?
Repair tips for resolving code P0014 may include replacing the camshaft position actuator solenoid, inspecting and potentially replacing the timing chain, ensuring proper engine oil quality and level, and replacing the camshaft position sensor if necessary.
5. Can driving with OBDII code P0014 in a Buick indicating an issue with the exhaust camshaft position system performance cause further damage?
Continuing to drive with code P0014 unresolved in a Buick can potentially cause damage to the engine, decrease fuel efficiency, and lead to more severe issues over time. It is recommended to address the problem promptly.
6. Are there any preventive maintenance measures to help avoid OBDII code P0014 in a Buick related to the exhaust camshaft position system performance?
To help prevent code P0014 from occurring, it is advisable to follow the manufacturer's recommended maintenance schedule, regularly check and change engine oil, and address any engine performance issues promptly.
7. How can I reset OBDII code P0014 in my Buick after addressing the exhaust camshaft position system performance problem?
After repairing the underlying issue causing code P0014, the code can be reset using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the error code.
8. Is it safe to continue driving my Buick with OBDII code P0014 related to the exhaust camshaft position system performance temporarily cleared?
It is generally safe to drive the vehicle after temporarily clearing code P0014, but it is important to address the root cause of the issue promptly to prevent further problems and potential damage.
9. Can a DIY enthusiast tackle the repair of OBDII code P0014 in a Buick associated with the exhaust camshaft position system performance?
While some individuals with automotive repair experience may be able to address code P0014 themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.
10. How much does it typically cost to repair OBDII code P0014 in a Buick related to the exhaust camshaft position system performance?
The cost of repairing code P0014 can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
Discuss the causes and fixes for P0014 Buick OBDII Code
Code P0014 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
