Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
To diagnose the P0014 Audi code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
This fault code is stored in the Engine Control Module (ECM) when a malfunction occurs in the camshaft position sensor monitoring system. This fault code can be set due to a fault with the camshaft position sensor, phonic wheel, associated wiring or engine control module. A mechanical defect which affects static valve timing can also cause this issue. A variable valve timing defect must also be investigated, including oil supply to the oil control solenoid. The oil control solenoid should also be tested using an oscilloscope, the solenoid may be operated during an actuator test. A fault in the sprocket dephaser or variator will also cause this fault code to be set.
A relationship test with an oscilloscope can be used to check the valve timing. For vehicles with a phonic wheel which is attached to a keyless pulley it must be noted that the static valve timing maybe correct but the position of the phonic wheel is incorrect.
Need more information on how to fix the P0014 Audi code? Get Access to Factory Service Manuals
Get the P0014 Audi code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0014 Audi code? Have you replaced any parts?
Any information is appreciated. Thanks