P0012 Lexus Code - Camshaft Position 'A' Timing Over-Retarded Bank 1
Quick Answer
The Variable Valve Timing (VVT) system adjusts the intake valve timing to improve driveability. Common causes include Low or Dirty Engine Oil, Valve timing, Faulty Camshaft Timing Oil Control Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0012 Lexus indicates Camshaft Position 'A' Timing Over-Retarded Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Valve timing, Faulty Camshaft Timing Oil Control Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0012 Lexus Description
The camshaft timing oil control valve assembly is a solenoid valve and switches the engine oil line. The valve moves when the Engine Control Module (ECM) applies 12 V to the solenoid. The ECM changes the energizing time to the solenoid (duty-cycle) in accordance with the camshaft position, crankshaft position, throttle position, etc.
The ECM optimizes the intake valve timing using the Variable Valve Timing (VVT) system to control the intake camshaft. The VVT system includes the ECM, the camshaft timing oil control valve assembly and the VVT controller (camshaft timing gear assembly). The ECM sends a target duty-cycle control signal to the camshaft timing oil control valve assembly. This control signal regulates the oil pressure supplied to the VVT controller. The VVT controller can advance or retard the intake camshaft.
If the difference between the target and actual intake valve timing is large, and changes in the actual intake valve timing are small, the ECM interprets this as a VVT controller stuck malfunction and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0012 Lexus?
- Low or Dirty Engine Oil
- Valve timing
- Faulty Camshaft Timing Oil Control Valve Assembly
- Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
- Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0012 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0012 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0012 Lexus code?
Need more information on how to fix the P0012 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0012 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0012 Lexus Code
No Frequently Asked Questions about P0012 Lexus Code found.
Discuss the causes and fixes for P0012 Lexus OBDII Code
-
2010 lexus RX - error code P0012, Engine check light and anti-skid light Intermittently comes on. Took it in for service and was told the error code was P0012 indicating a bank 1 intake oil control valve was bad. They had to remove the valve cover and check for any debris that also could cause the problem or cause additional problems. No debris were found and the valve was replaced. Total cost for the repair was 444.00 for the valve and 124.00 for labor with 2 hours to repair.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
