P0011 Dodge Code - Bank 1 Camshaft 1 Position Target Performance
Quick Answer
The Powertrain Control Module (PC) detects that the actual state of the camshaft position solenoid does not match the intended state. Common causes include Low or Dirty Engine Oil, Bank 1 Camshaft 1 Position Actuator circuit is open or shorted, Bank 1 Camshaft 1 Position Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 Dodge indicates Bank 1 Camshaft 1 Position Target Performance.
- Common causes
- Common causes include Low or Dirty Engine Oil, Bank 1 Camshaft 1 Position Actuator circuit is open or shorted, Bank 1 Camshaft 1 Position Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 Dodge Description
What are the Possible Causes of the DTC P0011 Dodge?
- Low or Dirty Engine Oil
- Bank 1 Camshaft 1 Position Actuator circuit is open or shorted
- Bank 1 Camshaft 1 Position Actuator circuit poor electrical connection
- Faulty Camshaft position solenoid
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0011 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 Dodge code?
Need more information on how to fix the P0011 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 Dodge Code
1. What are the common symptoms of OBDII code P0011 in a Dodge related to Bank 1 Camshaft 1 Position Target Performance?
- Common symptoms include rough idling, poor acceleration, reduced fuel efficiency, and the Check Engine Light illuminating on the dashboard.
2. What are some possible causes of OBDII code P0011 in a Dodge indicating an issue with Bank 1 Camshaft 1 Position Target Performance?
- Potential causes may include a faulty camshaft position sensor, issues with the camshaft phaser or actuator, engine timing problems, or low engine oil levels.
3. How can I diagnose the OBDII code P0011 in my Dodge that points to Bank 1 Camshaft 1 Position Target Performance issues?
- Diagnosing this code typically involves using a scan tool to retrieve the code, inspecting the camshaft position sensor and related components, checking for engine timing alignment, and examining oil levels and quality.
4. What are the recommended repair tips for addressing OBDII code P0011 in a Dodge indicating Bank 1 Camshaft 1 Position Target Performance concerns?
- Repair tips may include replacing the camshaft position sensor, inspecting and potentially replacing the camshaft phaser or actuator, ensuring proper engine timing, and performing an oil change if necessary.
5. Can driving with OBDII code P0011 related to Bank 1 Camshaft 1 Position Target Performance issues cause further damage to my Dodge?
- Continuing to drive with this code unresolved may lead to engine performance issues, potential damage to engine components, and increased fuel consumption over time.
6. How can I prevent OBDII code P0011 from recurring in my Dodge due to Bank 1 Camshaft 1 Position Target Performance problems?
- Regular maintenance, such as timely oil changes, monitoring engine performance, and addressing any engine-related issues promptly, can help prevent the recurrence of this code.
7. Is it safe to clear the OBDII code P0011 related to Bank 1 Camshaft 1 Position Target Performance in my Dodge without addressing the underlying issue?
- Clearing the code without addressing the root cause may temporarily turn off the Check Engine Light, but the underlying issue causing the code may persist and potentially lead to more severe problems over time.
8. Are there any common issues specific to Dodge vehicles that may trigger OBDII code P0011 indicating Bank 1 Camshaft 1 Position Target Performance issues?
- Some Dodge models may have known issues with the camshaft position sensor, camshaft phaser, or engine timing components, which can contribute to the occurrence of this code.
9. How long does it typically take to repair OBDII code P0011 in a Dodge related to Bank 1 Camshaft 1 Position Target Performance?
- The repair time can vary depending on the specific cause of the issue, but diagnosing and fixing this code may take anywhere from a few hours to a full day, depending on the complexity of the repairs needed.
10. Can I drive my Dodge with OBDII code P0011 indicating Bank 1 Camshaft 1 Position Target Performance issues if the symptoms are not severe?
- While driving with mild symptoms may be possible, it is generally recommended to address the underlying problem promptly to prevent further damage and maintain optimal engine performance.
Discuss the causes and fixes for P0011 Dodge OBDII Code
-
1996 dodge neon 2.0 L vin C got code 011, change the cam shaft position sensor, car cranks but does not start.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
