P0011 2017 Chevrolet Silverado Code - Intake Camshaft Position System Performance
Quick Answer
The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Low or Dirty Engine Oil, Faulty Intake Camshaft Position Actuator Solenoid, Intake Camshaft Position Actuator Solenoid harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 2017 Chevrolet Silverado indicates Intake Camshaft Position System Performance.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty Intake Camshaft Position Actuator Solenoid, Intake Camshaft Position Actuator Solenoid harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 2017 Chevrolet Silverado Description
Ignition voltage is supplied directly to the Camshaft Position Actuator Solenoid Valve. The ECM controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled up to a voltage. The ECM can determine if the control circuit is open, shorted to the ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open solenoid circuit in the CMP actuator for greater than 1 second or a cumulative of 5 seconds when the solenoid is commanded OFF.
The ECM monitors the performance of the camshaft position (CMP) actuator system by monitoring the calibrated desired position and the actual position of the camshaft, through the 4X signal of the CMP sensor. If the difference between the actual and the desired position is greater than a calibrated angle for a calibrated amount of time, DTC P0011 will be set.
What are the Possible Causes of the DTC P0011 2017 Chevrolet Silverado?
- Low or Dirty Engine Oil
- Faulty Intake Camshaft Position Actuator Solenoid
- Intake Camshaft Position Actuator Solenoid harness is open or shorted
- Intake Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0011 2017 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 2017 Chevrolet Silverado code?
Need more information on how to fix the P0011 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 2017 Chevrolet Silverado Code
1. What does OBDII code P0011 on a 2017 Chevrolet Silverado indicate?
The code P0011 indicates an issue with the Intake Camshaft Position System Performance.
2. What are the common symptoms of OBDII code P0011 on a 2017 Chevrolet Silverado?
Common symptoms include rough idling, poor acceleration, decreased fuel efficiency, and potential stalling.
3. What are the possible causes of OBDII code P0011 on a 2017 Chevrolet Silverado?
Possible causes include a faulty camshaft position sensor, a problem with the timing chain or belt, issues with the oil control valve, or engine timing problems.
4. How can I diagnose the OBDII code P0011 on my 2017 Chevrolet Silverado?
Diagnosis typically involves checking the camshaft position sensor, inspecting the timing components, testing the oil control valve, and verifying the engine timing.
5. Can I continue driving my 2017 Chevrolet Silverado with OBDII code P0011?
It is not recommended to drive the vehicle with this code as it can lead to further engine damage and potential safety hazards.
6. How much does it cost to repair OBDII code P0011 on a 2017 Chevrolet Silverado?
The cost of repair can vary depending on the specific cause, but it may range from $200 to $800 or more, including parts and labor.
7. Can I repair OBDII code P0011 on my 2017 Chevrolet Silverado myself?
While some DIYers may be able to address simple causes like a faulty sensor, more complex issues related to timing components may require professional expertise.
8. Are there any preventive measures to avoid OBDII code P0011 on a 2017 Chevrolet Silverado?
Regular maintenance, including timely oil changes and inspections, can help prevent issues that may trigger this code.
9. How urgent is it to address OBDII code P0011 on a 2017 Chevrolet Silverado?
It is recommended to address this code promptly to prevent potential engine damage and ensure the vehicle's optimal performance.
10. Can OBDII code P0011 on a 2017 Chevrolet Silverado cause other problems if left unattended?
Ignoring this code can lead to more severe engine issues, reduced fuel efficiency, and ultimately, engine failure if not addressed in a timely manner.
Discuss the causes and fixes for P0011 2017 Chevrolet Silverado OBDII Code
Code P0011 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
