P0011 2010 Nissan Rogue Code - Intake Valve Timing Control Performance Bank 1
Quick Answer
This mechanism hydraulically controls cam phases continuously with the fixed operating angle of the intake valve. Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0011 2010 Nissan Rogue indicates Intake Valve Timing Control Performance Bank 1.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty Intake Valve Timing Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0011 2010 Nissan Rogue Description
The ECM receives signals such as crankshaft position, camshaft position, engine speed, and engine coolant temperature. Then, the ECM sends ON/OFF pulse duty signals to the intake valve timing control solenoid valve depending on driving status. This makes it possible to control the shut/open timing of the intake valve to increase engine torque in low/mid speed range and output in high-speed range.
The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle. When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
What are the Possible Causes of the DTC P0011 2010 Nissan Rogue?
- Low or Dirty Engine Oil
- Faulty Intake Valve Timing Control Solenoid Valve
- Intake Valve Timing Control Solenoid Valve harness is open or shorted
- Intake Valve Timing Control Solenoid Valve circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Crankshaft Position Sensor (POS)
How to Fix the DTC P0011 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0011 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0011 2010 Nissan Rogue code?
Need more information on how to fix the P0011 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0011 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0011 2010 Nissan Rogue Code
1. What does the OBDII code P0011 on a 2010 Nissan Rogue indicate?
- The code P0011 indicates an issue with the Intake Valve Timing Control Performance on Bank 1 in the engine.
2. What are the common symptoms of a P0011 code on a 2010 Nissan Rogue?
- Common symptoms include rough idling, reduced engine performance, engine knocking noises, and poor fuel efficiency.
3. What are the possible causes of a P0011 code on a 2010 Nissan Rogue?
- Potential causes include a faulty Intake Valve Timing Control Solenoid, problems with the timing chain or belt, low engine oil levels, or a malfunctioning camshaft position sensor.
4. How can I diagnose the source of a P0011 code on my 2010 Nissan Rogue?
- Diagnosis typically involves checking the condition of the timing components, inspecting the Intake Valve Timing Control Solenoid, and testing the camshaft position sensor for proper operation.
5. Can I continue driving my 2010 Nissan Rogue with a P0011 code?
- It is not recommended to drive the vehicle with a P0011 code as it can lead to further engine damage and potential safety hazards.
6. How can I repair a P0011 code on a 2010 Nissan Rogue?
- Repairs may involve replacing the Intake Valve Timing Control Solenoid, addressing any timing chain or belt issues, ensuring proper engine oil levels, or replacing a faulty camshaft position sensor.
7. Are there any DIY tips for fixing a P0011 code on a 2010 Nissan Rogue?
- While some basic inspections like checking for loose connections or ensuring proper engine oil levels can be done by DIY enthusiasts, complex repairs should be left to professional mechanics.
8. How much does it typically cost to repair a P0011 code on a 2010 Nissan Rogue?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a couple of hundred dollars for minor fixes to over a thousand dollars for more extensive repairs.
9. Can a P0011 code on a 2010 Nissan Rogue be prevented?
- Regular maintenance, such as timely oil changes, checking and replacing timing components as needed, and addressing any engine performance issues promptly, can help prevent the occurrence of a P0011 code.
10. Will resetting the OBDII code erase the P0011 code on a 2010 Nissan Rogue?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the P0011 code is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0011 2010 Nissan Rogue OBDII Code
Code P0011 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
