P0011 2010 HONDA ACCORD - Variable Control Timing System Malfunction
P0011 2010 HONDA ACCORD Possible Causes
- Low or Dirty Engine Oil
- Valve Timing Control (VTC) open or shorted circuit.
- Valve Timing Control (VTC) electrical connector
- Faulty Valve Timing Control (VTC)
- Damaged ECM
First diagnose P0011 2010 HONDA ACCORD code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0011 2010 HONDA ACCORD code
Labor: 1.0The cost of diagnosing the P0011 2010 HONDA ACCORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P0011 2010 HONDA ACCORD Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of power
- Engine rough idle
P0011 2010 Honda Accord DescriptionThe Engine Control Module (ECM) optimizes the valve timing using the Valve Timing Control (VTC). The ECM sends a target duty cycle control signal to the VTC. This control signal regulates the oil pressure supplied to the VTC. The VTC can advance or retard the engine timing.
P0011 2010 HONDA ACCORD More InformationNeed more information on how to fix the P0011 2010 HONDA ACCORD code?
Get Access to Factory Service Manuals
Need more help?Get the P0011 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
P0011 2010 HONDA ACCORD CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0011 2010 Honda Accord code? Have you replaced any parts?
Any information is appreciated. Thanks