AutoCodes – Acura – P0010 Acura

P0010 Acura Code - Variable Valve Timing Control Oil Control Solenoid Valve 'A' Malfunction

Quick Answer

The Variable Valve Timing Control (VTC) system consists of the VTC Actuator 'A', the VTC Oil Control Solenoid Valve 'A', various sensors, and the Powertrain Control Module (PCM). Common causes include Dirty Oil, Low engine oil level, Faulty Variable Valve Timing Control (VTC) Oil Control Solenoid Valve 'A'. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0010 Acura indicates Variable Valve Timing Control Oil Control Solenoid Valve 'A' Malfunction.
Common causes: Common causes include Dirty Oil, Low engine oil level, Faulty Variable Valve Timing Control (VTC) Oil Control Solenoid Valve 'A'.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,676

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 25, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0010 Acura Description

The Variable Valve Timing Control (VTC) system consists of the VTC Actuator 'A', the VTC Oil Control Solenoid Valve 'A', various sensors, and the Powertrain Control Module (PCM). The PCM controls the VTC Oil Control Solenoid Valve 'A' by duty cycle and supplies hydraulic pressure to the advance chamber or the retard chamber in the actuator, so the valve timing is optimized depending on the driving conditions (engine load, engine speed, and vehicle speed). If the difference between the VTC Oil Control Solenoid Valve 'A' commanded current and the actual current is a specified current for a specified time, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0010 Acura - Variable Valve Timing Control Oil Control Solenoid Valve 'A' Malfunction - AutoCodes.com — P0010 Acura Code - Variable Valve Timing Control Oil Control Solenoid Valve 'A' Malfunction

What does this mean?

What are the Possible Causes of the DTC P0010 Acura?

Dirty Oil
Low engine oil level
Faulty Variable Valve Timing Control (VTC) Oil Control Solenoid Valve 'A'
VTC Oil Control Solenoid Valve 'A' harness is open or shorted
VTC Oil Control Solenoid Valve 'A' circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0010 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0010 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0010 Acura code?

Need more information on how to fix the P0010 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0010 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0010 Acura Code

What does OBDII code P0010 mean for my Acura?

OBDII code P0010 indicates a malfunction in the Variable Valve Timing (VVT) control oil control solenoid valve 'A', which regulates oil flow to the VVT system.

What are the common symptoms of the P0010 code?

Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and a check engine light illuminated on the dashboard.

What could cause the P0010 code to trigger?

Causes can include a faulty VVT solenoid, low engine oil levels, contaminated or thickened oil, wiring issues, or a malfunctioning engine control module (ECM).

How can I diagnose the P0010 code?

Start by checking the engine oil level and condition, then inspect the VVT solenoid and its wiring for damage or disconnection. A scan tool can also help verify the code and monitor VVT operation.

Is it safe to drive my Acura with a P0010 code?

While it may be safe for short distances, driving with this code can lead to reduced engine performance and fuel economy. It's best to address the issue promptly.

What repairs are typically needed for a P0010 code?

Repairs may involve replacing the VVT solenoid, cleaning or replacing the engine oil, fixing any wiring issues, or reprogramming the ECM.

Can I reset the check engine light after fixing the P0010 code?

Yes, after addressing the underlying issue, you can reset the check engine light using an OBDII scanner. However, the code may reappear if the problem persists.

How much does it typically cost to fix a P0010 code?

Repair costs can vary widely, but replacing a VVT solenoid may range from $100 to $400, depending on labor rates and parts prices.

Will changing the oil fix the P0010 code?

If the code is triggered due to low or contaminated oil, changing the oil could resolve the issue. However, if the solenoid itself is faulty, it will still need to be replaced.