AutoCodes – Chevrolet – P0010 2018 Chevrolet Silverado

P0010 2018 Chevrolet Silverado Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1

Quick Answer

The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0010 2018 Chevrolet Silverado indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1.
Common causes: Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 693

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 20, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0010 2018 Chevrolet Silverado Description

The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. The Camshaft Position Actuator Solenoid Valve signal from the ECM is Pulse Width Modulated (PWM). The ECM controls the Camshaft Position Actuator Solenoid Valve duty cycle by controlling the amount of solenoid valve ON time. The Camshaft Position Actuator Solenoid Valve controls the advance or the retard of each camshaft. The Camshaft Position Actuator Solenoid Valve controls the oil flow that applies the pressure to advance or retard the camshafts.
Ignition voltage is supplied directly to the Camshaft Position Actuator Solenoid Valve. The ECM controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled up to a voltage. The ECM can determine if the control circuit is open, shorted to the ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open solenoid circuit in the CMP actuator for greater than 1 second or a cumulative of 5 seconds when the solenoid is commanded OFF.
The ECM monitors the control circuit of the CMP actuator solenoid for electrical faults. The ECM can determine if a control circuit is open, shorted high, or shorted low. If the ECM detects a fault with the CMP actuator solenoid control, DTC P0010 will set.

OBDII Code P0010 2018 Chevrolet Silverado - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1 - AutoCodes.com — P0010 2018 Chevrolet Silverado Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P0010 2018 Chevrolet Silverado?

Dirty Oil
Low engine oil level
Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1
Intake Camshaft Position Actuator Solenoid Valve Bank 1 harness is open or shorted
Intake Camshaft Position Actuator Solenoid Valve Bank 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0010 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0010 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0010 2018 Chevrolet Silverado code?

Need more information on how to fix the P0010 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0010 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0010 2018 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P0010 in a 2018 Chevrolet Silverado?

The common symptoms of OBDII code P0010 include rough idling, poor engine performance, decreased fuel efficiency, and illuminated Check Engine Light.

2. What does OBDII code P0010 for a 2018 Chevrolet Silverado indicate?

OBDII code P0010 indicates a potential issue with the Intake Camshaft Position Actuator Solenoid Valve Control Circuit on Bank 1 of the engine.

3. What are the possible causes of OBDII code P0010 in a 2018 Chevrolet Silverado?

Possible causes of OBDII code P0010 include a faulty camshaft position actuator solenoid, wiring issues in the control circuit, low oil levels, or engine timing problems.

4. How can I diagnose the Intake Camshaft Position Actuator Solenoid Valve Control Circuit on Bank 1 in a 2018 Chevrolet Silverado?

You can diagnose the Intake Camshaft Position Actuator Solenoid Valve Control Circuit by performing a visual inspection of the wiring, testing the solenoid's resistance, and checking oil levels and engine timing.

5. Can I continue driving my 2018 Chevrolet Silverado with OBDII code P0010?

It is not recommended to drive your vehicle with OBDII code P0010 for an extended period, as it can lead to further engine damage and decreased performance.

6. How can I repair OBDII code P0010 in my 2018 Chevrolet Silverado?

Repairing OBDII code P0010 may involve replacing the camshaft position actuator solenoid, repairing any wiring issues, ensuring proper oil levels, and correcting engine timing if necessary.

7. Will resetting the Check Engine Light fix OBDII code P0010 in my 2018 Chevrolet Silverado?

Simply resetting the Check Engine Light will not fix the underlying issue causing OBDII code P0010. It is important to diagnose and repair the root cause of the problem.

8. How much does it typically cost to repair OBDII code P0010 in a 2018 Chevrolet Silverado?

The cost of repairing OBDII code P0010 can vary depending on the cause of the issue, but it may range from $200 to $500 for parts and labor.

9. Can a DIY enthusiast fix OBDII code P0010 in a 2018 Chevrolet Silverado?

While some aspects of diagnosing and repairing OBDII code P0010 can be done by a DIY enthusiast, it is recommended to consult a professional mechanic for accurate diagnosis and safe repairs.

10. How often does OBDII code P0010 occur in a 2018 Chevrolet Silverado?

OBDII code P0010 can occur sporadically or more frequently depending on the driving conditions, maintenance history, and overall health of the vehicle's engine components.