AutoCodes – GMC – P0010 2017 GMC Sierra

P0010 2017 GMC Sierra Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1

Quick Answer

The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0010 2017 GMC Sierra indicates Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1.
Common causes: Common causes include Dirty Oil, Low engine oil level, Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 578

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 20, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0010 2017 GMC Sierra Description

The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the timing of the camshafts while the engine is operating. The Camshaft Position Actuator Solenoid Valve signal from the ECM is Pulse Width Modulated (PWM). The ECM controls the Camshaft Position Actuator Solenoid Valve duty cycle by controlling the amount of solenoid valve ON time. The Camshaft Position Actuator Solenoid Valve controls the advance or the retard of each camshaft. The Camshaft Position Actuator Solenoid Valve controls the oil flow that applies the pressure to advance or retard the camshafts.
Ignition voltage is supplied directly to the Camshaft Position Actuator Solenoid Valve. The ECM controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled up to a voltage. The ECM can determine if the control circuit is open, shorted to the ground, or shorted to a voltage by monitoring the feedback voltage.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open solenoid circuit in the CMP actuator for greater than 1 second or a cumulative of 5 seconds when the solenoid is commanded OFF.
The ECM monitors the control circuit of the CMP actuator solenoid for electrical faults. The ECM can determine if a control circuit is open, shorted high, or shorted low. If the ECM detects a fault with the CMP actuator solenoid control, DTC P0010 will set.

OBDII Code P0010 2017 GMC Sierra - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1 - AutoCodes.com — P0010 2017 GMC Sierra Code - Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P0010 2017 GMC Sierra?

Dirty Oil
Low engine oil level
Faulty Intake Camshaft Position Actuator Solenoid Valve Bank 1
Intake Camshaft Position Actuator Solenoid Valve Bank 1 harness is open or shorted
Intake Camshaft Position Actuator Solenoid Valve Bank 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0010 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0010 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0010 2017 GMC Sierra code?

Need more information on how to fix the P0010 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0010 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0010 2017 GMC Sierra Code

1. What are the common symptoms of OBDII code P0010 in a 2017 GMC Sierra?

The common symptoms of code P0010 include rough idling, poor acceleration, decreased fuel efficiency, and the Check Engine Light illuminating on the dashboard.

2. What does the OBDII code P0010 in a 2017 GMC Sierra indicate?

Code P0010 indicates a problem with the Intake Camshaft Position Actuator Solenoid Valve Control Circuit Bank 1 in the engine of the vehicle.

3. What are the possible causes of OBDII code P0010 in a 2017 GMC Sierra?

Possible causes of code P0010 can include a faulty camshaft position actuator solenoid, wiring issues in the control circuit, low engine oil levels, or a malfunctioning engine control module (ECM).

4. How serious is OBDII code P0010 in a 2017 GMC Sierra?

While code P0010 may not cause immediate engine failure, it can lead to poor engine performance and potential damage over time if left unresolved. It is recommended to address the issue promptly.

5. Can I continue driving my 2017 GMC Sierra with OBDII code P0010?

It is not recommended to drive your vehicle extensively with code P0010 present, as it can affect engine performance and fuel efficiency. It is best to address the underlying issue as soon as possible.

6. How can I diagnose OBDII code P0010 in a 2017 GMC Sierra?

Diagnosing code P0010 typically involves using an OBDII scanner to retrieve the fault code, inspecting the camshaft position actuator solenoid and related wiring, and possibly performing tests on the engine control module.

7. What are the repair options for OBDII code P0010 in a 2017 GMC Sierra?

Repair options for code P0010 may include replacing the camshaft position actuator solenoid, repairing or replacing damaged wiring, ensuring proper engine oil levels, and resetting the engine control module.

8. Will resetting the Check Engine Light resolve OBDII code P0010 in a 2017 GMC Sierra?

Resetting the Check Engine Light may temporarily turn it off, but it will not fix the underlying issue causing code P0010. It is crucial to diagnose and address the root cause of the problem.

9. Can a DIY enthusiast fix OBDII code P0010 in a 2017 GMC Sierra?

Depending on their skill level and access to tools, a DIY enthusiast may be able to address code P0010 by replacing the camshaft position actuator solenoid or repairing wiring. However, complex issues may require professional assistance.

10. How much does it cost to repair OBDII code P0010 in a 2017 GMC Sierra?

The cost of repairing code P0010 can vary based on the specific issue causing the code, the parts needed for repair, and whether you choose to do it yourself or seek professional help. Costs may range from a few hundred to over a thousand dollars.