AutoCodes – Ford – P0010 2011 Ford Fusion

P0010 2011 Ford Fusion Code - Intake Camshaft Position Actuator Circuit Open Bank 1

Quick Answer

The Comprehensive Component Monitor (CCM) monitors the Variable Camshaft Timing (VCT) circuit to the Powertrain Control Module (PCM) for high and low voltage. Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0010 2011 Ford Fusion indicates Intake Camshaft Position Actuator Circuit Open Bank 1.
Common causes: Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,860

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0010 2011 Ford Fusion Description

The Comprehensive Component Monitor (CCM) monitors the Variable Camshaft Timing (VCT) circuit to the Powertrain Control Module (PCM) for high and low voltage. The Diagnostic Trouble Code (DTC) will set if during testing the voltage falls below a calibrated limit for a calibrated amount of time the test fails.

OBDII Code P0010 2011 Ford Fusion - Intake Camshaft Position Actuator Circuit Open Bank 1 - AutoCodes.com — P0010 2011 Ford Fusion Code - Intake Camshaft Position Actuator Circuit Open Bank 1

What does this mean?

What are the Possible Causes of the DTC P0010 2011 Ford Fusion?

Low or Dirty Engine Oil
Incorrect camshaft timing
Faulty Variable Camshaft Timing (VCT) Solenoid Valve
Variable Camshaft Timing Solenoid Valve circuit is open or shorted
Variable Camshaft Timing Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0010 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0010 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0010 2011 Ford Fusion code?

Need more information on how to fix the P0010 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0010 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0010 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0010 on a 2011 Ford Fusion?

- Common symptoms include rough idling, decreased fuel efficiency, engine misfires, and the Check Engine light illuminating.

2. What does the OBDII code P0010 "Intake Camshaft Position Actuator Circuit Open Bank 1" mean for a 2011 Ford Fusion?

- This code indicates that there is an open circuit in the intake camshaft position actuator of Bank 1, leading to potential engine performance issues.

3. What are the possible causes of OBDII code P0010 on a 2011 Ford Fusion?

- Causes can include a faulty camshaft position actuator, damaged wiring or connectors, low engine oil levels, or issues with the engine control module.

4. How can I diagnose the cause of OBDII code P0010 on my 2011 Ford Fusion?

- Diagnose by checking the wiring and connectors for damage, inspecting the camshaft position actuator, verifying engine oil levels, and using a scan tool to monitor data.

5. Can I continue driving my 2011 Ford Fusion with OBDII code P0010 present?

- It is not recommended to drive extensively with this code present, as it can lead to potential engine damage and further issues if left unresolved.

6. What are some repair tips for fixing OBDII code P0010 on a 2011 Ford Fusion?

- Repair tips include inspecting and repairing any damaged wiring or connectors, replacing the camshaft position actuator if faulty, ensuring proper engine oil levels, and clearing the code after repairs.

7. How much does it typically cost to repair OBDII code P0010 on a 2011 Ford Fusion?

- The cost can vary depending on the exact cause of the issue, but it may range from $200 to $600 for parts and labor at a repair shop.

8. Can I reset the OBDII code P0010 on my 2011 Ford Fusion myself?

- Yes, you can reset the code using an OBDII scanner or by disconnecting the car battery for a few minutes, but it is essential to address the underlying issue causing the code.

9. Are there any preventive measures to avoid OBDII code P0010 from occurring on a 2011 Ford Fusion?

- Regular maintenance, such as changing engine oil on time, inspecting wiring for damage, and addressing any Check Engine light promptly, can help prevent this code from occurring.

10. Will OBDII code P0010 on a 2011 Ford Fusion affect the vehicle's overall performance?

- Yes, this code can impact the vehicle's performance by causing rough idling, decreased fuel efficiency, engine misfires, and potential stalling if not addressed in a timely manner.