AutoCodes – Scion – P0010 2007 Scion xB

P0010 2007 Scion xB Code - Camshaft Position 'A' Actuator Circuit Bank 1

Quick Answer

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. Common causes include Dirty Oil, Variable Valve Timing (VVT) circuit is open or shorted, Oil Control Valve (OCV) circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0010 2007 Scion xB indicates Camshaft Position 'A' Actuator Circuit Bank 1.
Common causes: Common causes include Dirty Oil, Variable Valve Timing (VVT) circuit is open or shorted, Oil Control Valve (OCV) circuit is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,558

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 15, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0010 2007 Scion xB Description

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard. Optimizing engine timing will help the engine improve torque and fuel economy, and the exhaust emissions decrease under overall driving conditions. The Variable Valve Timing (VVT) system includes the Oil Control Valve (OCV) and VVT controller. The ECM detects the actual intake valve timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.

OBDII Code P0010 2007 Scion xB - Camshaft Position 'A' Actuator Circuit Bank 1 - AutoCodes.com — P0010 2007 Scion xB Code - Camshaft Position 'A' Actuator Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P0010 2007 Scion xB?

Dirty Oil
Variable Valve Timing (VVT) circuit is open or shorted
Oil Control Valve (OCV) circuit is open or shorted
Faulty variable valve timing (VVT)
Faulty oil control valve (OCV)
Damaged ECM

How to Fix the DTC P0010 2007 Scion xB?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If the engine oil is clean and the VVT and OCV circuits are OK, replaced the VVT to resolve the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0010 2007 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0010 2007 Scion xB code?

Need more information on how to fix the P0010 2007 Scion xB code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0010 2007 Scion xB code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0010 2007 Scion xB Code

1. What are the common symptoms of OBDII code P0010 in a 2007 Scion xB?

- Common symptoms of code P0010 in a 2007 Scion xB include rough idling, poor engine performance, and decreased fuel efficiency.

2. What does the OBDII code P0010 in a 2007 Scion xB indicate?

- OBDII code P0010 in a 2007 Scion xB indicates an issue with the Camshaft Position 'A' Actuator Circuit Bank 1.

3. What are the possible causes of OBDII code P0010 in a 2007 Scion xB?

- Possible causes of code P0010 in a 2007 Scion xB include a faulty camshaft position actuator, wiring issues, or a malfunctioning engine control module.

4. How can I diagnose the OBDII code P0010 in my 2007 Scion xB?

- Diagnosing code P0010 in a 2007 Scion xB involves using an OBDII scanner to retrieve the code, checking the camshaft position actuator, and inspecting the wiring for any damage.

5. Can I still drive my 2007 Scion xB with OBDII code P0010 present?

- It is not recommended to drive your 2007 Scion xB with OBDII code P0010 present, as it can lead to further engine damage if left unresolved.

6. How can I repair OBDII code P0010 in my 2007 Scion xB?

- Repairing code P0010 in a 2007 Scion xB may involve replacing the camshaft position actuator, repairing any damaged wiring, or resetting the engine control module.

7. Are there any DIY tips for fixing OBDII code P0010 in a 2007 Scion xB?

- DIY tips for fixing code P0010 in a 2007 Scion xB include checking and cleaning the camshaft position actuator, inspecting the wiring for any loose connections, and clearing the code with an OBDII scanner.

8. How much does it typically cost to repair OBDII code P0010 in a 2007 Scion xB?

- The cost to repair code P0010 in a 2007 Scion xB can vary depending on the specific cause, but it may range from $200 to $500 or more at a repair shop.

9. Can a faulty camshaft position sensor trigger OBDII code P0010 in a 2007 Scion xB?

- Yes, a faulty camshaft position sensor can potentially trigger OBDII code P0010 in a 2007 Scion xB if it is not functioning properly.

10. How can I prevent OBDII code P0010 from recurring in my 2007 Scion xB?

- To prevent OBDII code P0010 from recurring in a 2007 Scion xB, it is important to perform regular engine maintenance, address any issues promptly, and follow the manufacturer's recommended service schedule.