AutoCodes – Ford – P0010 2006 Ford Fusion

P0010 2006 Ford Fusion Code - Intake Camshaft Position Actuator Circuit Open Bank 1

Quick Answer

The Comprehensive Component Monitor (CCM) monitors the Variable Camshaft Timing (VCT) circuit to the Powertrain Control Module (PCM) for high and low voltage. Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0010 2006 Ford Fusion indicates Intake Camshaft Position Actuator Circuit Open Bank 1.
Common causes: Common causes include Low or Dirty Engine Oil, Incorrect camshaft timing, Faulty Variable Camshaft Timing (VCT) Solenoid Valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,586

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0010 2006 Ford Fusion Description

The Comprehensive Component Monitor (CCM) monitors the Variable Camshaft Timing (VCT) circuit to the Powertrain Control Module (PCM) for high and low voltage. The Diagnostic Trouble Code (DTC) will set if during testing the voltage falls below a calibrated limit for a calibrated amount of time the test fails.

OBDII Code P0010 2006 Ford Fusion - Intake Camshaft Position Actuator Circuit Open Bank 1 - AutoCodes.com — P0010 2006 Ford Fusion Code - Intake Camshaft Position Actuator Circuit Open Bank 1

What does this mean?

What are the Possible Causes of the DTC P0010 2006 Ford Fusion?

Low or Dirty Engine Oil
Incorrect camshaft timing
Faulty Variable Camshaft Timing (VCT) Solenoid Valve
Variable Camshaft Timing Solenoid Valve circuit is open or shorted
Variable Camshaft Timing Solenoid Valve circuit poor electrical connection

How to Fix the DTC P0010 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0010 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0010 2006 Ford Fusion code?

Need more information on how to fix the P0010 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0010 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0010 2006 Ford Fusion Code

1. What are the common symptoms of OBDII code P0010 on a 2006 Ford Fusion?

- Common symptoms include rough idling, engine stalling, poor acceleration, and reduced fuel efficiency.

2. What does the OBDII code P0010 "Intake Camshaft Position Actuator Circuit Open Bank 1" mean for a 2006 Ford Fusion?

- This code indicates that there is an open circuit in the intake camshaft position actuator on bank 1, leading to potential performance issues.

3. What are the possible causes of OBDII code P0010 on a 2006 Ford Fusion?

- Possible causes include a faulty camshaft position actuator, wiring issues, a malfunctioning camshaft position sensor, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0010 on my 2006 Ford Fusion?

- Diagnosing the issue may involve checking the wiring connections, testing the camshaft position actuator and sensor, and scanning the ECM for any related fault codes.

5. Can I continue driving my 2006 Ford Fusion with OBDII code P0010?

- It is not recommended to continue driving with this code as it can lead to further engine damage and possibly cause the vehicle to stall unexpectedly.

6. How do I repair OBDII code P0010 on a 2006 Ford Fusion?

- Repairing the code typically involves replacing the faulty camshaft position actuator, repairing any wiring issues, or addressing any other underlying causes identified during diagnosis.

7. Are there any DIY tips for fixing OBDII code P0010 on a 2006 Ford Fusion?

- While some may attempt DIY repairs, it is advisable to seek professional help due to the complexity of diagnosing and repairing issues related to the camshaft position actuator circuit.

8. How much does it cost to fix OBDII code P0010 on a 2006 Ford Fusion at a repair shop?

- The cost of repairing this code can vary depending on the specific cause, but it may range from $200 to $500 or more, including parts and labor.

9. Will resetting the OBDII code P0010 on a 2006 Ford Fusion make it go away?

- Resetting the code may temporarily clear the error, but it will likely return if the underlying issue causing the fault is not addressed and repaired.

10. Is OBDII code P0010 a common issue for 2006 Ford Fusion vehicles?

- While not extremely common, OBDII code P0010 can occur in 2006 Ford Fusion vehicles due to various factors such as age, mileage, and maintenance history.