P000D Subaru Code - 'B' Camshaft Position Slow Response Bank 2
Quick Answer
The Active Valve Control System (AVCS) varies camshaft timing by changing the camshaft phase angle depending on engine load in order to increase engine performance and efficiency and lower emission levels. Common causes include Low or Dirty Engine Oil, Faulty Oil Flow Control Solenoid, Oil Flow Control Solenoid harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P000D Subaru indicates 'B' Camshaft Position Slow Response Bank 2.
- Common causes
- Common causes include Low or Dirty Engine Oil, Faulty Oil Flow Control Solenoid, Oil Flow Control Solenoid harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P000D Subaru Description
What are the Possible Causes of the DTC P000D Subaru?
- Low or Dirty Engine Oil
- Faulty Oil Flow Control Solenoid
- Oil Flow Control Solenoid harness is open or shorted
- Oil Flow Control Solenoid circuit poor electrical connection
- Camshaft Phaser/Sprocket
How to Fix the DTC P000D Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2012-2013 Subaru Impreza
2012-2013 Subaru XV Crosstrek
2013 Subaru Legacy
2013 Subaru Outback
2011-2013 Subaru Forester
Subaru Factory Service Bulletin OBDII Code P000D
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P000D Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P000D Subaru code?
Need more information on how to fix the P000D Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P000D Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P000D Subaru Code
1. What are the common symptoms of OBDII code P000D Subaru 'B' Camshaft Position Slow Response Bank 2?
- Common symptoms include engine misfires, rough idle, reduced fuel efficiency, and potential stalling.
2. What can cause the OBDII code P000D 'B' Camshaft Position Slow Response Bank 2 in a Subaru?
- Possible causes include a faulty camshaft position sensor, wiring issues, timing chain problems, or issues with the camshaft phaser.
3. How serious is the OBDII code P000D Subaru 'B' Camshaft Position Slow Response Bank 2?
- This code can lead to poor engine performance and potential damage if left unresolved, so it is important to address it promptly.
4. Can driving with the P000D code present cause further damage to the vehicle?
- Continuing to drive with this code present can potentially cause damage to the engine over time, so it is recommended to address the issue promptly.
5. How is the OBDII code P000D Subaru 'B' Camshaft Position Slow Response Bank 2 diagnosed?
- Diagnosing this code typically involves using a scan tool to read the code, checking the camshaft position sensor, inspecting the wiring, and testing the camshaft phaser.
6. Is it possible to repair the P000D code in a Subaru at home?
- While some DIY enthusiasts may be able to address this code at home, it is recommended to seek professional help, especially if unsure about diagnosing or repairing the issue.
7. What are the typical repair options for resolving the OBDII code P000D Subaru 'B' Camshaft Position Slow Response Bank 2?
- Repair options may include replacing the camshaft position sensor, repairing any damaged wiring, adjusting the timing chain, or replacing the camshaft phaser.
8. How much does it cost to fix the OBDII code P000D 'B' Camshaft Position Slow Response Bank 2 in a Subaru?
- Repair costs can vary depending on the exact cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
9. Can resetting the OBDII code P000D Subaru 'B' Camshaft Position Slow Response Bank 2 make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not addressed, the code is likely to reappear once the problem resurfaces.
10. How long can I safely drive my Subaru with the P000D code before getting it repaired?
- It is recommended to avoid prolonged driving with this code present to prevent potential engine damage. Schedule a repair as soon as possible.
Discuss the causes and fixes for P000D Subaru OBDII Code
Code P000D Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
