AutoCodes – Dodge – P000C Dodge

P000C Dodge Code - 'A' Camshaft Position Slow Response Bank 2

Quick Answer

The Powertrain Control Module (PCM) monitors and evaluates the response of the actual position on a target position change. Common causes include Erratic camshaft position due to low oil pressure, Oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body, Camshaft advance mechanism binding (VCT unit). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P000C Dodge indicates 'A' Camshaft Position Slow Response Bank 2.
Common causes: Common causes include Erratic camshaft position due to low oil pressure, Oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body, Camshaft advance mechanism binding (VCT unit).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,756

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 06, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P000C Dodge Description

The Powertrain Control Module (PCM) monitors and evaluates the response of the actual position on a target position change. The setpoint and camshaft position are saved at the beginning of a setpoint change. If this change over time is large enough (gradient), the camshaft phasing change is evaluated. If the change after the diagnostic time is smaller than a threshold, a slow response is detected, and if the value is greater, then there is no concern. By detecting a concern, an antibounce counter is incremented otherwise the counter is decremented. If the counter exceeds an adjustable limit, the P000C is set.

OBDII Code P000C Dodge - 'A' Camshaft Position Slow Response Bank 2 - AutoCodes.com — P000C Dodge Code - 'A' Camshaft Position Slow Response Bank 2

What does this mean?

What are the Possible Causes of the DTC P000C Dodge?

Erratic camshaft position due to low oil pressure
Oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body
Camshaft advance mechanism binding (VCT unit)
Damaged VCT phaser
Radio frequency interference (RFI)

How to Fix the DTC P000C Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P000C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P000C Dodge code?

Need more information on how to fix the P000C Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P000C Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P000C Dodge Code

1. What are common symptoms of OBDII code P000C (Dodge) - 'A' Camshaft Position Slow Response Bank 2?

Symptoms may include rough idling, poor acceleration, engine misfires, and decreased fuel efficiency.

2. What are possible causes of the 'A' Camshaft Position Slow Response Bank 2 code?

Potential causes include a faulty camshaft position sensor, timing chain issues, engine oil sludge buildup, or a malfunctioning variable valve timing (VVT) system.

3. How can I diagnose the source of the 'A' Camshaft Position Slow Response Bank 2 code?

Diagnostic steps may involve checking the camshaft position sensor, inspecting the timing chain for wear or slack, testing the VVT system, and verifying engine oil levels and condition.

4. Can a dirty or clogged oil filter trigger the P000C fault code?

Yes, a dirty or clogged oil filter can restrict oil flow to the VVT system, leading to timing issues and potentially triggering the 'A' Camshaft Position Slow Response Bank 2 code.

5. Will driving with the P000C code illuminated cause further damage to the engine?

Continuing to drive with the code active may exacerbate existing issues, potentially leading to more severe engine damage over time. It is recommended to address the problem promptly.

6. How can I repair the 'A' Camshaft Position Slow Response Bank 2 issue?

Repairs may involve replacing the camshaft position sensor, addressing any timing chain problems, cleaning or replacing the VVT system components, and ensuring proper engine oil maintenance.

7. Is it safe to continue driving my vehicle with the P000C code pending?

It is not recommended to drive with the code pending, as it indicates a potential issue that can affect engine performance and reliability. Prompt diagnosis and repair are advised.

8. Can a mechanic reset the fault code without fixing the underlying issue?

A mechanic can clear the fault code, but if the underlying problem causing the code is not resolved, it is likely to reappear as the vehicle is driven and the ECM detects the same issue.

9. How much does it typically cost to repair the 'A' Camshaft Position Slow Response Bank 2 fault?

The cost of repair can vary depending on the exact cause of the issue, labor rates, and parts required. It is recommended to consult with a mechanic for an accurate estimate based on your specific vehicle.

10. Will a software update from the manufacturer resolve the P000C fault code?

In some cases, a software update provided by the manufacturer can address issues related to the 'A' Camshaft Position Slow Response Bank 2 code, especially if it is a known issue with a recommended fix.