AutoCodes – GMC – U3003 GMC

U3003 GMC Code - Battery Voltage

Quick Answer

The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Faulty Control Module setting the code, Control Module harness is open or shorted, Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U3003 GMC indicates Battery Voltage.
Common causes: Common causes include Faulty Control Module setting the code, Control Module harness is open or shorted, Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,339

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 18, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U3003 GMC Description

The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. With the ignition is ON, the Diagnostic Trouble Code (DTC) will set when the control module or sensor detects a system voltage of less than approximately 9 V for approximately 5 s.

OBDII Code U3003 GMC - Battery Voltage - AutoCodes.com — U3003 GMC Code - Battery Voltage

What does this mean?

What are the Possible Causes of the DTC U3003 GMC?

Faulty Control Module setting the code
Control Module harness is open or shorted
Control Module circuit poor electrical connection

How to Fix the DTC U3003 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U3003 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U3003 GMC code?

Need more information on how to fix the U3003 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U3003 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U3003 GMC Code

1. What does the OBDII code U3003 for Battery Voltage in a GMC vehicle indicate?

The U3003 code signals a low voltage condition in the vehicle's battery system.

2. What are the common symptoms of the U3003 GMC code?

Common symptoms include dimming lights, difficulty starting the vehicle, and potential power loss to various components.

3. What are the possible causes of the U3003 code in a GMC vehicle?

Potential causes include a weak or failing battery, faulty alternator, loose or corroded battery connections, or issues with the charging system.

4. How can I diagnose the U3003 code in my GMC vehicle?

Diagnosing the U3003 code involves checking the battery voltage using a multimeter, inspecting the battery connections, testing the alternator output, and examining the overall health of the charging system.

5. Can I still drive my GMC vehicle with the U3003 code present?

It is not recommended to drive your vehicle with the U3003 code active, as it can lead to further electrical system issues and potential breakdowns.

6. How do I clear the U3003 code from my GMC's OBDII system?

To clear the U3003 code, you can use an OBDII scanner to reset the fault codes after addressing the underlying battery voltage issue.

7. What are some repair tips for resolving the U3003 GMC code?

Repair tips include checking and replacing the battery if necessary, inspecting and cleaning battery terminals, testing and replacing the alternator if faulty, and ensuring all electrical connections are secure.

8. How serious is the U3003 code in a GMC vehicle?

The U3003 code should be addressed promptly to prevent potential electrical system failures and ensure the safe operation of the vehicle.

9. Can a DIY enthusiast fix the U3003 code issue in a GMC vehicle?

While some basic troubleshooting and repairs can be done by a DIY enthusiast, complex electrical system issues may require professional diagnosis and repair.

10. How much does it typically cost to repair the U3003 code in a GMC vehicle?

The cost of repairing the U3003 code can vary depending on the underlying issue, but it may range from a simple battery replacement to a more involved alternator or wiring repair, potentially costing a few hundred dollars to over a thousand dollars.