AutoCodes – Buick – U2608 Buick

U2608 Buick Code - Electric A/C Compressor Control Module Lost Communication With Hybrid/EV Powertrain Control Module

Quick Answer

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Hybrid/EV Powertrain Control Module, Hybrid/EV Powertrain Control Module harness is open or shorted, Hybrid/EV Powertrain Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U2608 Buick indicates Electric A/C Compressor Control Module Lost Communication With Hybrid/EV Powertrain Control Module.
Common causes: Common causes include Faulty Hybrid/EV Powertrain Control Module, Hybrid/EV Powertrain Control Module harness is open or shorted, Hybrid/EV Powertrain Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 582

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 18, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U2608 Buick Description

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device.
This diagnostic is used to check the loss of communication with the Hybrid/EV Powertrain Control Module on a high-speed General Motors Local Area Network (GMLAN) bus. The Battery Energy Control Module supervises a periodic serial data message to check the communication status of the Hybrid/EV Powertrain Control Module. If this message is not received within 400 ms, the Battery Energy Control Module increases its fail count. When this fail count is over X Cal Value (7) during Y Cal Value (10 samples), the diagnostic status of this code is set to Failed and transmitted over high voltage energy high-speed GMLAN bus to the Hybrid/EV Powertrain Control Module.
The Diagnostic Trouble Code (DTC) will set when a supervised periodic message that includes the transmitter device availability has not been received within 400 ms.

OBDII Code U2608 Buick - Electric A/C Compressor Control Module Lost Communication With Hybrid/EV Powertrain Control Module - AutoCodes.com — U2608 Buick Code - Electric A/C Compressor Control Module Lost Communication With Hybrid/EV Powertrain Control Module

What does this mean?

What are the Possible Causes of the DTC U2608 Buick?

Faulty Hybrid/EV Powertrain Control Module
Hybrid/EV Powertrain Control Module harness is open or shorted
Hybrid/EV Powertrain Control Module circuit poor electrical connection
Faulty Electric A/C Compressor Control Module

How to Fix the DTC U2608 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U2608 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U2608 Buick code?

Need more information on how to fix the U2608 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U2608 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U2608 Buick Code

1. What are the common symptoms of OBDII code U2608 in a Buick related to the Electric A/C Compressor Control Module?

- Common symptoms include loss of air conditioning function, irregular cooling performance, and potential illumination of the Check Engine Light.

2. What are the potential causes of the U2608 code in a Buick?

- The U2608 code usually indicates a communication issue between the Electric A/C Compressor Control Module and the Hybrid/EV Powertrain Control Module. This can be caused by wiring issues, faulty modules, or software glitches.

3. How can I diagnose the U2608 code in my Buick?

- Diagnosing the U2608 code typically involves using a diagnostic scanner to retrieve the specific error codes, checking the wiring connections between the modules, and testing the modules themselves for proper functionality.

4. Can I still drive my Buick with the U2608 code present?

- While it may be possible to drive the vehicle with the U2608 code, it is recommended to address the issue promptly to prevent further damage to the components involved and ensure optimal performance.

5. Is it safe to attempt repairs for the U2608 code on my own?

- If you have experience with automotive diagnostics and repair, you may attempt basic checks like inspecting wiring connections. However, for more complex issues, it is advisable to seek assistance from a qualified mechanic or dealership.

6. How much does it typically cost to repair the U2608 code in a Buick?

- The cost of repairing the U2608 code can vary depending on the exact cause of the issue. It may involve simple repairs like fixing wiring connections or more complex solutions like replacing control modules, with costs ranging from a few hundred to a few thousand dollars.

7. Can resetting the fault codes clear the U2608 code temporarily?

- Resetting the fault codes may temporarily clear the Check Engine Light associated with the U2608 code, but if the underlying issue is not addressed, the code is likely to reappear.

8. Are there any preventive maintenance tips to avoid the U2608 code in a Buick?

- Regularly inspecting and maintaining the electrical connections and components related to the Electric A/C Compressor Control Module can help prevent issues that may trigger the U2608 code.

9. How long does it usually take to repair the U2608 code in a Buick?

- The repair time for the U2608 code can vary based on the complexity of the issue and the availability of parts. Simple fixes may be completed within a few hours, while more involved repairs could take longer.

10. Can the U2608 code affect the overall performance of the Buick?

- Yes, the U2608 code can impact the overall performance of the vehicle, especially in terms of air conditioning functionality and potentially the interaction between the electric and powertrain systems.