AutoCodes – GMC – U2605 GMC

U2605 GMC Code - Battery Energy Control Module Lost Communication With Hybrid/EV Battery Interface Control Module 3

Quick Answer

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Hybrid/EV Battery Interface Control Module 3, Hybrid/EV Battery Interface Control Module 3 harness is open or shorted, Hybrid/EV Battery Interface Control Module 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U2605 GMC indicates Battery Energy Control Module Lost Communication With Hybrid/EV Battery Interface Control Module 3.
Common causes
Common causes include Faulty Hybrid/EV Battery Interface Control Module 3, Hybrid/EV Battery Interface Control Module 3 harness is open or shorted, Hybrid/EV Battery Interface Control Module 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 528
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 18, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code U2605 GMC Description

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device.
The scan tool does not communicate the Hybrid/EV Battery Interface Control Modules 3 on Battery Energy Control Module dedicated bus.
The Diagnostic Trouble Code (DTC) will set when there is no temperature report message from Hybrid/EV Battery Interface Control Modules 3 to Battery Energy Control Module within 4s.
OBDII Code U2605 GMC - Battery Energy Control Module Lost Communication With Hybrid/EV Battery Interface Control Module 3 - AutoCodes.com
U2605 GMC Code - Battery Energy Control Module Lost Communication With Hybrid/EV Battery Interface Control Module 3

What are the Possible Causes of the DTC U2605 GMC?

  • Faulty Hybrid/EV Battery Interface Control Module 3
  • Hybrid/EV Battery Interface Control Module 3 harness is open or shorted
  • Hybrid/EV Battery Interface Control Module 3 circuit poor electrical connection
  • Faulty Battery Energy Control Module

How to Fix the DTC U2605 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U2605 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U2605 GMC code?

Need more information on how to fix the U2605 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U2605 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U2605 GMC Code

1. What are the common symptoms of OBDII code U2605 in a GMC vehicle?

Common symptoms include a check engine light illuminating on the dashboard, decreased fuel efficiency, issues with the hybrid or electric powertrain system, and potential drivability problems.

2. What are the possible causes of OBDII code U2605 in a GMC vehicle?

The code U2605 typically indicates a communication issue between the Battery Energy Control Module and the Hybrid/EV Battery Interface Control Module 3. Possible causes can include wiring faults, loose connections, module malfunctions, or software issues.

3. How can I diagnose the cause of OBDII code U2605 in my GMC vehicle?

Diagnosing this code usually involves using a professional OBDII scanner to retrieve the specific details of the fault and checking the system for any visible wiring or connection issues. It may also require advanced diagnostic equipment to analyze the communication between modules.

4. Can I drive my GMC vehicle with OBDII code U2605 present?

It is not recommended to drive your vehicle with this code present, as it may lead to further damage to the hybrid or electric powertrain system. It is advisable to have the issue diagnosed and repaired as soon as possible.

5. How can I repair OBDII code U2605 in my GMC vehicle?

Repairing this code often involves addressing the communication problem between the Battery Energy Control Module and the Hybrid/EV Battery Interface Control Module 3. This may require repairing or replacing wiring, connectors, or modules as needed.

6. Is it possible to reset OBDII code U2605 in a GMC vehicle without fixing the underlying issue?

While you can clear the code temporarily using an OBDII scanner, the underlying problem causing the code will persist. It is important to diagnose and repair the issue to prevent the code from reoccurring.

7. Are there any recalls or technical service bulletins related to OBDII code U2605 in GMC vehicles?

It's advisable to check with your local GMC dealership or online resources for any recalls or technical service bulletins related to this specific OBDII code. Manufacturers may release updates or remedies for known issues.

8. Can a DIY enthusiast fix OBDII code U2605 in a GMC vehicle?

Depending on the individual's level of expertise and access to tools, some DIY enthusiasts may be able to diagnose and repair this code. However, due to the complexity of hybrid and electric powertrain systems, it is recommended to consult a professional technician for proper diagnosis and repair.

9. How much does it typically cost to repair OBDII code U2605 in a GMC vehicle?

The cost of repairing this code can vary based on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from reputable repair shops or dealerships for an accurate estimate.

10. Can OBDII code U2605 cause any long-term damage to the vehicle if left unrepaired?

Leaving OBDII code U2605 unrepaired can potentially lead to further complications with the hybrid or electric powertrain system, affecting the vehicle's performance and reliability. It's best to address the issue promptly to prevent any long-term damage.

Discuss the causes and fixes for U2605 GMC OBDII Code

Code U2605 GMC comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play