AutoCodes – Generic – U1876

U1876 Code - Drive Motor Control Module 1 Lost Communication With Engine Control Module

Quick Answer

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1876 indicates Drive Motor Control Module 1 Lost Communication With Engine Control Module.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,527

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1876 Description

Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device. The Diagnostic Trouble Code (DTC) will set if a supervised periodic message that includes the transmitter device availability has not been received.

OBDII Code U1876 - Drive Motor Control Module 1 Lost Communication With Engine Control Module - AutoCodes.com — U1876 Code - Drive Motor Control Module 1 Lost Communication With Engine Control Module

What does this mean?

What are the Possible Causes of the DTC U1876?

Faulty Engine Control Module (ECM)
Engine Control Module harness is open or shorted
Engine Control Module circuit poor electrical connection

How to Fix the DTC U1876?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1876 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1876 code?

Need more information on how to fix the U1876 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1876 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

U1876 Buick — Drive Motor Control Module 1 Lost Communication With Engine Control Module
U1876 Cadillac — Drive Motor Control Module 1 Lost Communication With Engine Control Module
U1876 Chevrolet — Drive Motor Control Module 1 Lost Communication With Engine Control Module
U1876 GMC — Drive Motor Control Module 1 Lost Communication With Engine Control Module

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1876 Code

What does the OBDII code U1876 mean?

The OBDII code U1876 indicates that the Drive Motor Control Module 1 has lost communication with the Engine Control Module, which can affect vehicle performance.

What symptoms might I experience with code U1876?

Common symptoms include reduced engine power, unresponsive acceleration, the vehicle entering limp mode, and warning lights on the dashboard.

What are some common causes of code U1876?

Possible causes include faulty wiring or connectors, a malfunctioning Drive Motor Control Module, issues with the Engine Control Module, or software glitches in the vehicle's electronic systems.

How can I diagnose the U1876 code?

Start by inspecting the wiring and connectors for damage or corrosion. Then, use an OBD-II scanner to check for other related codes, and verify the functionality of the Drive Motor Control Module and Engine Control Module.

What repairs might be needed to fix code U1876?

Repairs could involve replacing damaged wiring or connectors, reprogramming or replacing the Drive Motor Control Module, or addressing issues with the Engine Control Module.

Can I drive my vehicle with the U1876 code?

It is not recommended to drive the vehicle with this code, as it can lead to reduced performance and safety issues. Itâ€™s best to address the problem promptly.

How can I prevent the U1876 code from reoccurring?

Regularly inspect and maintain your vehicleâ€™s electrical system, ensure proper connections, and stay updated on software updates for the vehicleâ€™s modules.

Will clearing the U1876 code resolve the issue?

Clearing the code may temporarily turn off the warning lights, but if the underlying issue is not fixed, the code is likely to return.

Is U1876 a serious code?

Yes, it can indicate a significant communication issue between critical vehicle modules, which may affect the vehicle's performance and safety. Immediate attention is recommended.