U1469 Dodge Code - Implausible Gear Shift Position Signal Sent DPT CAN-CAN
Quick Answer
The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1469 Dodge indicates Implausible Gear Shift Position Signal Sent DPT CAN-CAN.
- Common causes
- Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1469 Dodge Description
What are the Possible Causes of the DTC U1469 Dodge?
- Faulty Electronic Shift Module (ESM)
- Electronic Shift Module (ESM) harness is open or shorted
- Electronic Shift Module (ESM) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC U1469 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1469 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1469 Dodge code?
Need more information on how to fix the U1469 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1469 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1469 Dodge Code
1. What does the OBDII code U1469 mean on a Dodge vehicle?
The U1469 code indicates that an implausible gear shift position signal was detected, sent via the CAN-CAN (Controller Area Network) communication system.
2. What are the common symptoms of the U1469 code in a Dodge?
Symptoms may include erratic transmission behavior, the vehicle being stuck in one gear, a check engine light, or difficulty shifting gears.
3. What causes the U1469 code to appear on a Dodge?
Common causes include a faulty gear position sensor, damaged wiring or connectors in the CAN network, or a malfunctioning transmission control module (TCM).
4. Can the U1469 code cause drivability issues?
Yes, this code can lead to drivability issues such as improper gear shifts, reduced performance, or the vehicle going into limp mode.
5. How is the U1469 code diagnosed on a Dodge?
A technician will use a scan tool to confirm the code, inspect the gear position sensor, check the CAN network wiring and connectors, and test the TCM for proper operation.
6. Can I drive my Dodge with the U1469 code active?
It’s not recommended to drive with this code active, as it can cause unsafe transmission behavior and may damage the transmission if not addressed promptly.
7. How can I fix the U1469 code on my Dodge?
Repairs may include replacing a faulty gear position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the TCM if necessary.
8. Is the U1469 code specific to Dodge vehicles?
While U1469 can appear on other vehicles, the exact definition and troubleshooting steps may be specific to Dodge models.
9. What tools are needed to troubleshoot the U1469 code?
You’ll need an OBDII scanner capable of reading manufacturer-specific codes, a multimeter to test wiring, and possibly specialized tools for TCM or sensor diagnostics.
10. Will clearing the U1469 code solve the problem?
Clearing the code may temporarily remove the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for U1469 Dodge OBDII Code
Code U1469 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
