U1461 Jeep Code - Implausible Data Received From ESM On DPT
Quick Answer
The purpose of the diagnostic is to monitor the Controller Area Network (CAN) BUS, the transmitted messages on the CAN BUS and the validity of the CAN signals. Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1461 Jeep indicates Implausible Data Received From ESM On DPT.
- Common causes
- Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module (ESM) harness is open or shorted, Electronic Shift Module (ESM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1461 Jeep Description
What are the Possible Causes of the DTC U1461 Jeep?
- Faulty Electronic Shift Module (ESM)
- Electronic Shift Module (ESM) harness is open or shorted
- Electronic Shift Module (ESM) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC U1461 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1461 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1461 Jeep code?
Need more information on how to fix the U1461 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1461 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1461 Jeep Code
1. What are the common symptoms of OBDII code U1461 in a Jeep?
- Common symptoms include issues with the Electronic Shift Module (ESM), dashboard warning lights, transmission shifting problems, and loss of communication with the ESM.
2. What does the OBDII code U1461 "Implausible Data Received From ESM On DPT" mean for a Jeep?
- This code indicates that the Engine Control Module (ECM) has detected an issue with the data received from the Electronic Shift Module (ESM) related to the Drive Position Transmission (DPT) sensor.
3. What are the possible causes of OBDII code U1461 in a Jeep?
- Possible causes include faulty ESM, damaged wiring or connectors in the ESM circuit, a malfunctioning DPT sensor, software issues, or communication errors between modules.
4. How can I diagnose OBDII code U1461 in my Jeep?
- Diagnosing this code typically involves using a professional OBDII scanner to retrieve the fault codes, checking the ESM and DPT sensor for proper functionality, inspecting wiring and connectors for damage, and performing a communication network test.
5. Can I still drive my Jeep with OBDII code U1461 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to transmission issues and potential safety hazards. It's best to address the problem promptly to avoid further damage.
6. How can I repair OBDII code U1461 in my Jeep?
- Repairing this code may involve replacing the Electronic Shift Module (ESM), repairing or replacing damaged wiring, fixing the DPT sensor, updating software, or addressing communication issues between modules.
7. Is it possible to reset the OBDII code U1461 in a Jeep without fixing the underlying issue?
- While you can clear the code temporarily with an OBDII scanner, it will likely reappear if the root cause is not addressed. It's essential to diagnose and repair the problem to prevent future issues.
8. Can a DIY enthusiast fix OBDII code U1461 in a Jeep?
- Depending on your skill level and access to tools, you may be able to address this code yourself. However, due to the complexity of the transmission and electronic systems involved, it's recommended to consult a professional mechanic for proper diagnosis and repair.
9. How much does it typically cost to repair OBDII code U1461 in a Jeep?
- The cost of repairing this code can vary widely based on the specific issue causing it, parts needed for replacement, labor costs, and whether the repairs are done at a dealership or an independent repair shop. Costs can range from a few hundred to over a thousand dollars.
10. Are there any preventive maintenance tips to avoid OBDII code U1461 in a Jeep?
- To prevent this code, it's important to regularly maintain your Jeep, address any transmission or electrical issues promptly, avoid water damage to electronic components, and follow the manufacturer's recommended service schedules.
Discuss the causes and fixes for U1461 Jeep OBDII Code
Code U1461 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
