AutoCodes – Jeep – U1414 Jeep

U1414 Jeep Code - Implausible/Missing ECU Network Configuration Data

Quick Answer

With the ignition on. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1414 Jeep indicates Implausible/Missing ECU Network Configuration Data.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,498

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 21, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1414 Jeep Description

With the ignition on. The Occupant Restraint Controller (ORC) on board diagnostics continuously monitors the CAN Bus message from the Totally Integrated Power Module (TIPM) containing the ORC configuration data. This Diagnostic Trouble Code (DTC) will set if the data is invalid or missing.

OBDII Code U1414 Jeep - Implausible/Missing ECU Network Configuration Data - AutoCodes.com — U1414 Jeep Code - Implausible/Missing ECU Network Configuration Data

What does this mean?

What are the Possible Causes of the DTC U1414 Jeep?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC U1414 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1414 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1414 Jeep code?

Need more information on how to fix the U1414 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1414 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1414 Jeep Code

1. What are the common symptoms of OBDII code U1414 in a Jeep?

- Common symptoms include the Check Engine Light being illuminated, poor vehicle performance, and potential issues with the transmission shifting.

2. What causes the U1414 code to be triggered in a Jeep?

- The U1414 code is typically triggered by a communication error between the various control modules in the vehicle, often due to a faulty ECU or wiring issues.

3. How can I diagnose the U1414 code in my Jeep?

- Diagnosing the U1414 code usually involves using an OBDII scanner to retrieve the code and then conducting a thorough inspection of the ECU, wiring harness, and related components for any visible damage or issues.

4. Can I drive my Jeep with the U1414 code present?

- It is not recommended to drive your Jeep with the U1414 code present, as it can lead to further damage to the vehicle and potentially unsafe driving conditions.

5. How can I repair the U1414 code in my Jeep?

- Repairing the U1414 code often involves resetting the ECU, checking and repairing any damaged wiring, and potentially replacing the ECU if it is found to be faulty.

6. Are there any DIY tips for fixing the U1414 code in a Jeep?

- While some basic diagnostics can be done at home, diagnosing and repairing the U1414 code may require specialized tools and expertise, so it is recommended to consult a professional mechanic.

7. How much does it cost to fix the U1414 code in a Jeep?

- The cost of fixing the U1414 code can vary depending on the extent of the issue, with repairs potentially ranging from a simple reset to more complex ECU replacement, costing several hundred dollars.

8. Can a low battery voltage trigger the U1414 code in a Jeep?

- Yes, low battery voltage can sometimes cause communication errors between control modules, leading to the U1414 code being triggered in a Jeep.

9. Will disconnecting the battery reset the U1414 code in a Jeep?

- Disconnecting the battery may temporarily reset the code, but if the underlying issue causing the U1414 code is not fixed, the code is likely to reappear once the vehicle is driven again.

10. Is the U1414 code a common issue in Jeep vehicles?

- The U1414 code is relatively common in Jeep vehicles, particularly in models with electronic control systems that may experience communication errors between modules.