AutoCodes – Dodge – U1267 Dodge

U1267 Dodge Code - No Valid Data From ESM On CAN

Quick Answer

The Transmission Control Module (TCM) monitors the Controller Area Network (CAN) C and CAN DPT circuits for failures. Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module harness is open or shorted, Electronic Shift Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1267 Dodge indicates No Valid Data From ESM On CAN.
Common causes: Common causes include Faulty Electronic Shift Module (ESM), Electronic Shift Module harness is open or shorted, Electronic Shift Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,142

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 10, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1267 Dodge Description

The Transmission Control Module (TCM) monitors the Controller Area Network (CAN) C and CAN DPT circuits for failures. This Diagnostic Trouble Code (DTC) sets when there is a problem with both CAN busses and the TCM can not receive data from the Electronic Shift Module (ESM) to determine the shifter position. The Diagnostic Trouble Code (DTC) sets when no valid data from ESM on CAN C or CAN DPT.

OBDII Code U1267 Dodge - No Valid Data From ESM On CAN - AutoCodes.com — U1267 Dodge Code - No Valid Data From ESM On CAN

What does this mean?

What are the Possible Causes of the DTC U1267 Dodge?

Faulty Electronic Shift Module (ESM)
Electronic Shift Module harness is open or shorted
Electronic Shift Module circuit poor electrical connection

How to Fix the DTC U1267 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1267 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1267 Dodge code?

Need more information on how to fix the U1267 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1267 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1267 Dodge Code

1. What does the OBDII code U1267 for Dodge, "No Valid Data From ESM On CAN," indicate?

The code U1267 means that the Electronic Shift Module (ESM) is not sending valid data through the Controller Area Network (CAN) bus.

2. What are the common symptoms of OBDII code U1267 in a Dodge vehicle?

Common symptoms include issues with shifting gears, the inability to shift out of park, dashboard warning lights related to the transmission, and potential loss of communication with the ESM.

3. What are the possible causes of the U1267 code in a Dodge vehicle?

Possible causes include a faulty Electronic Shift Module, wiring or connection issues in the CAN bus network, a defective CAN bus, or a problem with the Powertrain Control Module (PCM).

4. How can I diagnose the U1267 code in my Dodge vehicle?

Diagnosing the U1267 code typically involves using a professional OBDII scanner to retrieve the specific fault codes, checking the wiring and connections related to the ESM and CAN bus, and performing a thorough inspection of the Electronic Shift Module.

5. Can I still drive my Dodge vehicle with the U1267 code present?

It is not recommended to drive your vehicle with the U1267 code present, as it can lead to potential transmission issues and unsafe driving conditions. It is best to address the problem promptly.

6. Is it possible to reset the U1267 code in a Dodge vehicle?

While you can clear the code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.

7. How much does it typically cost to repair the U1267 code in a Dodge vehicle?

Repair costs can vary depending on the specific cause of the issue. It is advisable to consult a professional mechanic for an accurate diagnosis and cost estimate.

8. Are there any DIY repair tips for the U1267 code in a Dodge vehicle?

DIY repair for the U1267 code may include checking and securing the wiring connections, inspecting the Electronic Shift Module for visible damage, and ensuring proper communication within the CAN bus network.

9. Can a low battery voltage trigger the U1267 code in a Dodge vehicle?

Yes, low battery voltage can sometimes cause communication issues between modules, including the ESM, leading to the U1267 code. It is essential to ensure the battery is in good condition.

10. How long does it take to repair the U1267 code in a Dodge vehicle?

The repair time for the U1267 code can vary based on the complexity of the issue. Simple fixes like reconnecting loose wires may take a short time, while more intricate problems could require several hours or more to diagnose and repair.