U1101 Lexus Code - Lost Communication With Distance Control ECU
Quick Answer
The Seat Belt Control ECU receives signals from the master cylinder solenoid (Skid Control ECU) and the center airbag sensor via the CAN communication line. Common causes include CAN communication system, Faulty Distance Control ECU, Faulty Seat Belt Control ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1101 Lexus indicates Lost Communication With Distance Control ECU.
- Common causes
- Common causes include CAN communication system, Faulty Distance Control ECU, Faulty Seat Belt Control ECU.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U1101 Lexus Description
What are the Possible Causes of the DTC U1101 Lexus?
- CAN communication system
- Faulty Distance Control ECU
- Faulty Seat Belt Control ECU
How to Fix the DTC U1101 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U1101 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U1101 Lexus code?
Need more information on how to fix the U1101 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1101 Lexus code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about U1101 Lexus Code
1. What are the common symptoms of OBDII code U1101 in a Lexus related to "Lost Communication With Distance Control ECU"?
- Common symptoms include malfunctioning cruise control, adaptive cruise control issues, and warning lights related to the distance control system.
2. What are the possible causes of OBDII code U1101 in a Lexus?
- The code U1101 can be triggered by issues such as a faulty distance control ECU, damaged wiring or connectors, software glitches, or a communication network problem.
3. How can I diagnose the OBDII code U1101 in my Lexus?
- Diagnosis involves using an OBDII scanner to retrieve the specific code, checking for other related codes, inspecting wiring and connectors, and testing the distance control ECU.
4. Can I continue driving my Lexus with the U1101 code present?
- It is generally recommended to address the issue causing the U1101 code as soon as possible to prevent potential safety hazards and to ensure proper functioning of the distance control system.
5. What are some repair tips for resolving OBDII code U1101 in a Lexus?
- Repair tips may include checking and repairing damaged wiring, replacing the distance control ECU if necessary, updating software, and ensuring all connections are secure.
6. Is it possible to reset the U1101 code in a Lexus without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is important to address the root cause to prevent the code from reoccurring and to ensure the distance control system functions properly.
7. How much does it typically cost to repair OBDII code U1101 in a Lexus?
- The cost of repair can vary depending on the specific issue causing the code, but it may involve expenses for replacement parts, labor, and diagnostic fees.
8. Can a DIY enthusiast fix the U1101 code issue in a Lexus?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address simpler causes of the U1101 code, such as checking and repairing wiring connections.
9. Will fixing the U1101 code in my Lexus require a visit to a dealership or specialized mechanic?
- While some cases may require specialized knowledge or tools, many issues related to the U1101 code can be addressed by independent mechanics or knowledgeable DIY enthusiasts.
10. How can I prevent the OBDII code U1101 from occurring in my Lexus in the future?
- To prevent the U1101 code, regular maintenance, checking wiring for damage, keeping software up to date, and addressing any warning signs promptly can help maintain the health of the distance control system.
Discuss the causes and fixes for U1101 Lexus OBDII Code
Code U1101 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
