AutoCodes – Ford – U1009 Ford

U1009 Ford Code - SCP Invalid Or Missing Data For Engine Torque

Quick Answer

This is a manufacturer-specific fault code and can be used for several different faults, depending upon what the manufacturer wants to use it for. Common causes include Faulty / intermittent ignition module, J1850 / SCP Bus wiring intermittently open, shorted to power or ground, Faulty / intermittent connection at the Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U1009 Ford indicates SCP Invalid Or Missing Data For Engine Torque.
Common causes: Common causes include Faulty / intermittent ignition module, J1850 / SCP Bus wiring intermittently open, shorted to power or ground, Faulty / intermittent connection at the Powertrain Control Module (PCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,913

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 16, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U1009 Ford Description

This is a manufacturer-specific fault code and can be used for several different faults, depending upon what the manufacturer wants to use it for. The Powertrain Control Module (PCM) communicates over the Serial Communication Protocol (SCP) bus network or J1850 bus. This is a medium-speed bus communication system and is fault-tolerant, which means any type of intermittent/loose connection at these controllers will cause this code to set in memory, but will still operate, provided a data path is available. When the PCM is unable to communicate with any other controller at any time while the ignition switch is turned on, code U1009 will set. This is the typical reason for this code to set.

OBDII Code U1009 Ford - SCP Invalid Or Missing Data For Engine Torque - AutoCodes.com — U1009 Ford Code - SCP Invalid Or Missing Data For Engine Torque

What does this mean?

What are the Possible Causes of the DTC U1009 Ford?

Faulty / intermittent ignition module
J1850 / SCP Bus wiring intermittently open, shorted to power or ground
Faulty / intermittent connection at the Powertrain Control Module (PCM)
Faulty EGR Sensor

How to Fix the DTC U1009 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

This is typically an electrical wiring connection issue, either at the engine controller or at the sensors being monitored by the manufacturer.
It can occur if:
The wrong EGR sensor is installed on the vehicle. Verify with the manufacturer for the latest.
A bad ignition module is present.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U1009 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U1009 Ford code?

Need more information on how to fix the U1009 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1009 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1009 Ford Code

What are the common symptoms of OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque)?

Common symptoms include poor engine performance, reduced fuel efficiency, and illuminated check engine light.

What are the possible causes of OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque)?

Possible causes may include faulty wiring connections, damaged sensors, issues with the powertrain control module (PCM), or communication network problems.

How can I diagnose OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque)?

Diagnosis typically involves using a diagnostic scanner to retrieve the trouble codes, checking for any related codes, inspecting wiring and connectors for damage, and testing relevant sensors and modules.

What are some repair tips for addressing OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque)?

Repair tips may include checking and repairing any damaged wiring, replacing faulty sensors or modules, ensuring proper connections, and clearing the trouble codes after repairs are completed.

Is it safe to continue driving with OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque) present?

It is generally not recommended to continue driving with this code present, as it can lead to further damage to the vehicle and potentially worsen performance and fuel efficiency.

Can OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque) be fixed without professional help?

While some basic checks and repairs can be done by DIY enthusiasts, resolving this code may require advanced diagnostic tools and expertise, so professional help is often recommended.

How much does it typically cost to repair OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque)?

The cost of repair can vary depending on the specific cause of the code, parts needed for replacement, and labor costs. It is advisable to consult with a mechanic for an accurate estimate.

Will resetting the PCM clear OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque)?

Resetting the PCM may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It is important to diagnose and fix the root cause of the problem.

What should I do if OBDII code U1009 Ford (SCP Invalid Or Missing Data For Engine Torque) keeps recurring after repairs?

If the code keeps recurring after repairs, it is essential to recheck the components that were repaired or replaced, investigate for any new issues, and ensure all repairs were done correctly to resolve the problem.